Messages in this thread Patch in this message | | | From | Naresh Solanki <> | Subject | [PATCH 2/2] mfd: max597x: Add support for MAX5970 and MAX5978 | Date | Wed, 1 Mar 2023 10:12:34 +0100 |
| |
From: Patrick Rudolph <patrick.rudolph@9elements.com>
Implement a regulator driver with IRQ support for fault management. Written against documentation [1] and [2] and tested on real hardware.
Every channel has it's own regulator supply nammed 'vss1-supply' and 'vss2-supply'. The regulator supply is used to determine the output voltage, as the smart switch provides no output regulation. The driver requires the 'shunt-resistor-micro-ohms' to be present in the devicetree to properly calculate current related values.
You must specify compatible devictree layout:
regulator@3a { reg = <0x3a>; vss1-supply = <&p3v3>; compatible = "maxim,max5978";
...
regulators { sw0_ref: SW0 { regulator-compatible = "SW0"; shunt-resistor-micro-ohms = <12000>; ... } } }
1: https://datasheets.maximintegrated.com/en/ds/MAX5970.pdf 2: https://datasheets.maximintegrated.com/en/ds/MAX5978.pdf
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> --- drivers/mfd/Kconfig | 10 ++++ drivers/mfd/simple-mfd-i2c.c | 13 +++++ include/linux/mfd/max597x.h | 97 ++++++++++++++++++++++++++++++++++++ 3 files changed, 120 insertions(+) create mode 100644 include/linux/mfd/max597x.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index d4fc4ca9fdbd..de899e0d2f1a 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -266,6 +266,16 @@ config MFD_MADERA_SPI Support for the Cirrus Logic Madera platform audio SoC core functionality controlled via SPI. +config MFD_MAX597X + tristate "Maxim 597x power switch and monitor" + depends on (I2C && OF) + select MFD_SIMPLE_MFD_I2C + help + This driver controls a Maxim 5970/5978 switch via I2C bus. + The MAX5970/5978 is a smart switch with no output regulation, but + fault protection and voltage and current monitoring capabilities. + Also it supports upto 4 indication leds. + config MFD_CS47L15 bool "Cirrus Logic CS47L15" select PINCTRL_CS47L15 diff --git a/drivers/mfd/simple-mfd-i2c.c b/drivers/mfd/simple-mfd-i2c.c index e31f13fd6a79..20782b4dd172 100644 --- a/drivers/mfd/simple-mfd-i2c.c +++ b/drivers/mfd/simple-mfd-i2c.c @@ -72,9 +72,22 @@ static const struct simple_mfd_data silergy_sy7636a = { .mfd_cell_size = ARRAY_SIZE(sy7636a_cells), }; +static const struct mfd_cell max597x_cells[] = { + { .name = "max597x-regulator", }, + { .name = "max597x-iio", }, + { .name = "max597x-led", }, +}; + +static const struct simple_mfd_data maxim_max597x = { + .mfd_cell = max597x_cells, + .mfd_cell_size = ARRAY_SIZE(max597x_cells), +}; + static const struct of_device_id simple_mfd_i2c_of_match[] = { { .compatible = "kontron,sl28cpld" }, { .compatible = "silergy,sy7636a", .data = &silergy_sy7636a}, + { .compatible = "maxim,max5970", .data = &maxim_max597x}, + { .compatible = "maxim,max5978", .data = &maxim_max597x}, {} }; MODULE_DEVICE_TABLE(of, simple_mfd_i2c_of_match); diff --git a/include/linux/mfd/max597x.h b/include/linux/mfd/max597x.h new file mode 100644 index 000000000000..8a4da98caf3e --- /dev/null +++ b/include/linux/mfd/max597x.h @@ -0,0 +1,97 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Device driver for regulators in MAX5970 and MAX5978 IC + * + * Copyright (c) 2022 9elements GmbH + * + * Author: Patrick Rudolph <patrick.rudolph@9elements.com> + */ + +#ifndef _MAX597X_H +#define _MAX597X_H + +#include <linux/regmap.h> + +#define MAX5970_NUM_SWITCHES 2 +#define MAX5978_NUM_SWITCHES 1 +#define MAX597X_NUM_LEDS 4 + +struct max597x_data { + int num_switches; + u32 irng[MAX5970_NUM_SWITCHES]; + u32 mon_rng[MAX5970_NUM_SWITCHES]; + u32 shunt_micro_ohms[MAX5970_NUM_SWITCHES]; +}; + +enum max597x_chip_type { + MAX597x_TYPE_MAX5978 = 1, + MAX597x_TYPE_MAX5970, +}; + +#define MAX5970_REG_CURRENT_L(ch) (0x01 + (ch) * 4) +#define MAX5970_REG_CURRENT_H(ch) (0x00 + (ch) * 4) +#define MAX5970_REG_VOLTAGE_L(ch) (0x03 + (ch) * 4) +#define MAX5970_REG_VOLTAGE_H(ch) (0x02 + (ch) * 4) +#define MAX5970_REG_MON_RANGE 0x18 +#define MAX5970_MON_MASK 0x3 +#define MAX5970_MON(reg, ch) \ + (((reg) >> ((ch) * 2)) & MAX5970_MON_MASK) +#define MAX5970_MON_MAX_RANGE_UV 16000000 + +#define MAX5970_REG_CH_UV_WARN_H(ch) (0x1A + (ch) * 10) +#define MAX5970_REG_CH_UV_WARN_L(ch) (0x1B + (ch) * 10) +#define MAX5970_REG_CH_UV_CRIT_H(ch) (0x1C + (ch) * 10) +#define MAX5970_REG_CH_UV_CRIT_L(ch) (0x1D + (ch) * 10) +#define MAX5970_REG_CH_OV_WARN_H(ch) (0x1E + (ch) * 10) +#define MAX5970_REG_CH_OV_WARN_L(ch) (0x1F + (ch) * 10) +#define MAX5970_REG_CH_OV_CRIT_H(ch) (0x20 + (ch) * 10) +#define MAX5970_REG_CH_OV_CRIT_L(ch) (0x21 + (ch) * 10) + +#define MAX5970_VAL2REG_H(x) (((x) >> 2) & 0xFF) +#define MAX5970_VAL2REG_L(x) ((x) & 0x3) + +#define MAX5970_REG_DAC_FAST(ch) (0x2E + (ch)) + +#define MAX5970_FAST2SLOW_RATIO 200 + +#define MAX5970_REG_STATUS0 0x31 +#define MAX5970_CB_IFAULTF(ch) (1 << (ch)) +#define MAX5970_CB_IFAULTS(ch) (1 << ((ch) + 4)) + +#define MAX5970_REG_STATUS1 0x32 +#define STATUS1_PROT_MASK 0x3 +#define STATUS1_PROT(reg) \ + (((reg) >> 6) & STATUS1_PROT_MASK) +#define STATUS1_PROT_SHUTDOWN 0 +#define STATUS1_PROT_CLEAR_PG 1 +#define STATUS1_PROT_ALERT_ONLY 2 + +#define MAX5970_REG_STATUS2 0x33 +#define MAX5970_IRNG_MASK 0x3 +#define MAX5970_IRNG(reg, ch) \ + (((reg) >> ((ch) * 2)) & MAX5970_IRNG_MASK) + +#define MAX5970_REG_STATUS3 0x34 +#define MAX5970_STATUS3_ALERT BIT(4) +#define MAX5970_STATUS3_PG(ch) BIT(ch) + +#define MAX5970_REG_FAULT0 0x35 +#define UV_STATUS_WARN(ch) (1 << (ch)) +#define UV_STATUS_CRIT(ch) (1 << ((ch) + 4)) + +#define MAX5970_REG_FAULT1 0x36 +#define OV_STATUS_WARN(ch) (1 << (ch)) +#define OV_STATUS_CRIT(ch) (1 << ((ch) + 4)) + +#define MAX5970_REG_FAULT2 0x37 +#define OC_STATUS_WARN(ch) (1 << (ch)) + +#define MAX5970_REG_CHXEN 0x3b +#define CHXEN(ch) (3 << ((ch) * 2)) + +#define MAX5970_REG_LED_FLASH 0x43 + +#define MAX_REGISTERS 0x49 +#define ADC_MASK 0x3FF + +#endif /* _MAX597X_H */ -- 2.39.1
| |