lkml.org 
[lkml]   [2023]   [Feb]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectAw: Re: [PATCH v2 4/5] arm: dts: mt7623: mux phy0 on Bananapi BPI-R2
Date
Hi aranc,

have tested this series, basicly it works, but i get only ~620 Mbits/sec (much more i will need on wan) in tx-mode of r2, rx-mode (iperf3 -c IP -R on r2) gets full 939 Mbits/sec. Both no retransmitts.

tried with my laptop which gets 940Mbit/sec in tx mode too...other end is a R2 with 5.15 connected to lan0 (and eth1+aux enabled, dmesg clean so far...for the "kernel log flooded"-comment).

maybe gmac1 needs to be tweaked a bit (clock-settings)?

can you confirm this with your board?

regards Frank

\
 
 \ /
  Last update: 2023-03-27 00:09    [W:0.058 / U:0.932 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site