lkml.org 
[lkml]   [2023]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/3] arm64: dts: qcom: sa8775p-ride: enable relevant QUPv3 IPs
Date
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

This enables the QUPv3 interfaces that are exposed on the sa8775p-ride
board: I2C, SPI and the GNSS UART.

Bartosz Golaszewski (3):
arm64: dts: qcom: sa8775p: add the i2c node for sa8775p-ride
arm64: dts: qcom: sa8775p: add the SPI node for sa8775p-ride
arm64: dts: qcom: sa8775p: add the GNSS high-speed UART for
sa8775p-ride

arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 67 +++++++++++++++++++++
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 72 +++++++++++++++++++++++
2 files changed, 139 insertions(+)

--
2.37.2

\
 
 \ /
  Last update: 2023-03-27 00:23    [W:0.055 / U:1.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site