lkml.org 
[lkml]   [2023]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 0/3] arm64: dts: qcom: sa8775p-ride: enable relevant QUPv3 IPs
From


On 2/14/2023 9:27 PM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
>
> This enables the QUPv3 interfaces that are exposed on the sa8775p-ride
> board: I2C, SPI and the GNSS UART.
>
> Bartosz Golaszewski (3):
> arm64: dts: qcom: sa8775p: add the i2c node for sa8775p-ride
> arm64: dts: qcom: sa8775p: add the SPI node for sa8775p-ride
> arm64: dts: qcom: sa8775p: add the GNSS high-speed UART for

Hi Bartosz,
This instance is for BT HS UART , not for GNSS.
For GNSS we have uart12 (0x00A94000).

-Shazad

> sa8775p-ride
>
> arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 67 +++++++++++++++++++++
> arch/arm64/boot/dts/qcom/sa8775p.dtsi | 72 +++++++++++++++++++++++
> 2 files changed, 139 insertions(+)
>

\
 
 \ /
  Last update: 2023-03-27 00:23    [W:0.145 / U:1.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site