lkml.org 
[lkml]   [2023]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: dts: imx6ull-dhcor: Remove 900MHz operating point
Date
Due to CPU lifetime consideration of the SoC manufacturer [1] and
the preferred area of operation in the industrial related
environment, set the maximum frequency for each DHCOM i.MX6ULL to
792MHz, as with the industrial type. This is done by removing the
operating point at 900MHz and set the clock-frequency to 792000000.

[1] https://www.nxp.com/docs/en/application-note/AN5337.pdf

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
---
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
To: linux-arm-kernel@lists.infradead.org
---
arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-som.dtsi | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-som.dtsi
index 45315adfaa86..75486e1b0c15 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-som.dtsi
@@ -28,10 +28,14 @@
/*
* Due to the design as a solderable SOM, there are no capacitors
* below the SoC, therefore higher voltages are required.
+ * Due to CPU lifetime consideration of the SoC manufacturer and
+ * the preferred area of operation in the industrial related
+ * environment, set the maximum frequency for each DHCOM i.MX6ULL
+ * to 792MHz, as with the industrial type.
*/
+ clock-frequency = <792000000>;
operating-points = <
/* kHz uV */
- 900000 1275000
792000 1250000 /* Voltage increased */
528000 1175000
396000 1025000
@@ -39,7 +43,6 @@
>;
fsl,soc-operating-points = <
/* KHz uV */
- 900000 1250000
792000 1250000 /* Voltage increased */
528000 1175000
396000 1175000
--
2.11.0

\
 
 \ /
  Last update: 2023-12-21 17:49    [W:0.029 / U:0.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site