Messages in this thread | | | Date | Mon, 5 Feb 2024 13:51:39 +0800 | From | Shawn Guo <> | Subject | Re: [PATCH] ARM: dts: imx6ull-dhcor: Remove 900MHz operating point |
| |
On Thu, Dec 21, 2023 at 05:46:33PM +0100, Christoph Niedermaier wrote: > Due to CPU lifetime consideration of the SoC manufacturer [1] and > the preferred area of operation in the industrial related > environment, set the maximum frequency for each DHCOM i.MX6ULL to > 792MHz, as with the industrial type. This is done by removing the > operating point at 900MHz and set the clock-frequency to 792000000. > > [1] https://www.nxp.com/docs/en/application-note/AN5337.pdf > > Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Applied, thanks!
| |