Messages in this thread Patch in this message | | | From | Manish Pandey <> | Subject | [PATCH V2] arm64: dts: qcom: qcm6490: Add UFS nodes | Date | Thu, 21 Dec 2023 16:49:59 +0530 |
| |
Add UFS host controller and Phy nodes for Qualcomm qcm6490 Board.
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com> --- Changes from v1: - updated with correct patchset
--- arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts index 03e97e27d16d..51efd46b576c 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts @@ -440,6 +440,25 @@ status = "okay"; }; +&ufs_mem_hc { + reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l7b_2p9>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l9b_1p2>; + vccq-max-microamp = <900000>; + vccq2-supply = <&vreg_l9b_1p2>; + vccq2-max-microamp = <900000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l10c_0p8>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + status = "okay"; +}; + &usb_1 { status = "okay"; }; -- 2.17.1
| |