lkml.org 
[lkml]   [2023]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 10/16] arm64: dts: qcom: sm8550-aim300: add display and panel
Date
Enable Display Subsystem with Visionox VTDR6130 Panel.

Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
---
arch/arm64/boot/dts/qcom/sm8550-aim300.dts | 68 ++++++++++++++++++++++
1 file changed, 68 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8550-aim300.dts b/arch/arm64/boot/dts/qcom/sm8550-aim300.dts
index cafddc02aef0..9b568ae9581e 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-aim300.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-aim300.dts
@@ -432,6 +432,46 @@
<&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
};

+&mdss {
+ status = "okay";
+};
+
+&mdss_dsi0 {
+ vdda-supply = <&vreg_l3e_1p2>;
+ status = "okay";
+
+ panel@0 {
+ compatible = "visionox,vtdr6130";
+ reg = <0>;
+
+ pinctrl-0 = <&sde_dsi_active>, <&sde_te_active>;
+ pinctrl-1 = <&sde_dsi_suspend>, <&sde_te_suspend>;
+ pinctrl-names = "default", "sleep";
+
+ reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+ vci-supply = <&vreg_l13b_3p0>;
+ vdd-supply = <&vreg_l11b_1p2>;
+ vddio-supply = <&vreg_l12b_1p8>;
+
+ port {
+ panel0_in: endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+ };
+};
+
+&mdss_dsi0_out {
+ remote-endpoint = <&panel0_in>;
+ data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+ vdds-supply = <&vreg_l1e_0p88>;
+ status = "okay";
+};
+
&pcie_1_phy_aux_clk {
status = "disabled";
};
@@ -533,6 +573,34 @@
&tlmm {
gpio-reserved-ranges = <32 8>;

+ sde_dsi_active: sde-dsi-active-state {
+ pins = "gpio133";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ sde_dsi_suspend: sde-dsi-suspend-state {
+ pins = "gpio133";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ sde_te_active: sde-te-active-state {
+ pins = "gpio86";
+ function = "mdp_vsync";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ sde_te_suspend: sde-te-suspend-state {
+ pins = "gpio86";
+ function = "mdp_vsync";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
wcd_default: wcd-reset-n-active-state {
pins = "gpio108";
function = "gpio";
--
2.17.1
\
 
 \ /
  Last update: 2023-11-20 14:02    [W:0.473 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site