lkml.org 
[lkml]   [2023]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 10/16] arm64: dts: qcom: sm8550-aim300: add display and panel
From


在 11/17/2023 6:30 PM, Dmitry Baryshkov 写道:
> On 17/11/2023 12:18, Tengfei Fan wrote:
>> Enable Display Subsystem with Visionox VTDR6130 Panel.
>>
>> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/sm8550-aim300.dts | 68 ++++++++++++++++++++++
>>   1 file changed, 68 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sm8550-aim300.dts
>> b/arch/arm64/boot/dts/qcom/sm8550-aim300.dts
>> index cafddc02aef0..9b568ae9581e 100644
>> --- a/arch/arm64/boot/dts/qcom/sm8550-aim300.dts
>> +++ b/arch/arm64/boot/dts/qcom/sm8550-aim300.dts
>> @@ -432,6 +432,46 @@
>>            <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
>>   };
>> +&mdss {
>> +    status = "okay";
>> +};
>> +
>> +&mdss_dsi0 {
>> +    vdda-supply = <&vreg_l3e_1p2>;
>> +    status = "okay";
>> +
>> +    panel@0 {
>> +        compatible = "visionox,vtdr6130";
>> +        reg = <0>;
>> +
>> +        pinctrl-0 = <&sde_dsi_active>, <&sde_te_active>;
>> +        pinctrl-1 = <&sde_dsi_suspend>, <&sde_te_suspend>;
>> +        pinctrl-names = "default", "sleep";
>> +
>> +        reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
>> +
>> +        vci-supply = <&vreg_l13b_3p0>;
>> +        vdd-supply = <&vreg_l11b_1p2>;
>> +        vddio-supply = <&vreg_l12b_1p8>;
>> +
>> +        port {
>> +            panel0_in: endpoint {
>> +                remote-endpoint = <&mdss_dsi0_out>;
>> +            };
>> +        };
>> +    };
>> +};
>> +
>> +&mdss_dsi0_out {
>> +    remote-endpoint = <&panel0_in>;
>> +    data-lanes = <0 1 2 3>;
>> +};
>> +
>> +&mdss_dsi0_phy {
>> +    vdds-supply = <&vreg_l1e_0p88>;
>> +    status = "okay";
>> +};
>> +
>>   &pcie_1_phy_aux_clk {
>>       status = "disabled";
>>   };
>> @@ -533,6 +573,34 @@
>>   &tlmm {
>>       gpio-reserved-ranges = <32 8>;
>> +    sde_dsi_active: sde-dsi-active-state {
>
> sde is the name from the other kernel branch. Drop it please. Just 'dsi'
> is enough.
sure, I wil drop sde in next new version patch series.
>
>> +        pins = "gpio133";
>> +        function = "gpio";
>> +        drive-strength = <8>;
>> +        bias-disable;
>> +    };
>> +
>> +    sde_dsi_suspend: sde-dsi-suspend-state {
>> +        pins = "gpio133";
>> +        function = "gpio";
>> +        drive-strength = <2>;
>> +        bias-pull-down;
>> +    };
>> +
>> +    sde_te_active: sde-te-active-state {
>> +        pins = "gpio86";
>> +        function = "mdp_vsync";
>> +        drive-strength = <2>;
>> +        bias-pull-down;
>> +    };
>> +
>> +    sde_te_suspend: sde-te-suspend-state {
>> +        pins = "gpio86";
>> +        function = "mdp_vsync";
>> +        drive-strength = <2>;
>> +        bias-pull-down;
>> +    };
>> +
>>       wcd_default: wcd-reset-n-active-state {
>>           pins = "gpio108";
>>           function = "gpio";
>

--
Thx and BRs,
Tengfei Fan

\
 
 \ /
  Last update: 2023-11-21 01:56    [W:0.225 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site