lkml.org 
[lkml]   [2023]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] usb: dwc3: don't reset device side if dwc3 was configured as host-only
Hello,

Similar issue with ZynqMP board related to that patch:

xilinx-psgtr fd400000.phy: lane 3 (type 1, protocol 3): PLL lock timeout
phy phy-fd400000.phy.3: phy poweron failed --> -110
dwc3 fe300000.usb: error -ETIMEDOUT: failed to initialize core

With CONFIG_USB_DWC3_DUAL_ROLE and dr_mode = "host";

It may not be the correct fix.

--
Köry Maincent, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2023-11-20 14:01    [W:0.301 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site