lkml.org 
[lkml]   [2023]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] usb: dwc3: don't reset device side if dwc3 was configured as host-only
On Thu, 16 Nov 2023 17:42:06 +0100
Köry Maincent <kory.maincent@bootlin.com> wrote:

> Hello,
>
> Similar issue with ZynqMP board related to that patch:
>
> xilinx-psgtr fd400000.phy: lane 3 (type 1, protocol 3): PLL lock timeout
> phy phy-fd400000.phy.3: phy poweron failed --> -110
> dwc3 fe300000.usb: error -ETIMEDOUT: failed to initialize core
>
> With CONFIG_USB_DWC3_DUAL_ROLE and dr_mode = "host";
>
> It may not be the correct fix.

Just figured out there was a patch (357191036889 usb: dwc3: Soft reset phy on
probe for host) from Thinh aimed to fix it but the issue is still here on
ZynqMP.

Regards,

--
Köry Maincent, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2023-11-20 14:01    [W:0.231 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site