Messages in this thread | | | From | Nitheesh Sekar <> | Subject | [PATCH 0/6] Enable IPQ5018 PCI support | Date | Tue, 3 Oct 2023 17:38:40 +0530 |
| |
This patch series adds the relevant phy and controller DT configurations for enabling PCI gen2 support on IPQ5018.
Nitheesh Sekar (6): dt-bindings: phy: qcom,uniphy-pcie: Document PCIe uniphy dt-bindings: PCI: qcom: Add IPQ5108 SoC phy: qcom: Introduce PCIe UNIPHY 28LP driver PCI: qcom: Add support for IPQ5018 arm64: dts: qcom: ipq5018: Add PCIe related nodes arm64: dts: qcom: ipq5018: Enable PCIe
.../devicetree/bindings/pci/qcom,pcie.yaml | 36 ++ .../bindings/phy/qcom,uniphy-pcie-28lp.yaml | 77 ++++ .../arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts | 9 + arch/arm64/boot/dts/qcom/ipq5018.dtsi | 186 +++++++++- drivers/pci/controller/dwc/pcie-qcom.c | 22 +- drivers/phy/qualcomm/Kconfig | 12 + drivers/phy/qualcomm/Makefile | 1 + .../phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c | 336 ++++++++++++++++++ 8 files changed, 663 insertions(+), 16 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/qcom,uniphy-pcie-28lp.yaml create mode 100644 drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c
-- 2.17.1
| |