Messages in this thread | | | Date | Tue, 24 Oct 2023 22:45:15 +0200 | From | Andi Shyti <> | Subject | Re: [PATCH V2 1/7] i2c: sprd: Add configurations that support 1Mhz and 3.4Mhz frequencies |
| |
Hi Huangzheng,
On Mon, Oct 23, 2023 at 04:11:52PM +0800, Huangzheng Lai wrote: > Add support for 1Mhz and 3.4Mhz frequency configuration. > > Signed-off-by: Huangzheng Lai <Huangzheng.Lai@unisoc.com> > Acked-by: Andi Shyti <andi.shyti@kernel.org>
you can make this:
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
> --- > drivers/i2c/busses/i2c-sprd.c | 25 ++++++++++++++++++++----- > 1 file changed, 20 insertions(+), 5 deletions(-) > > diff --git a/drivers/i2c/busses/i2c-sprd.c b/drivers/i2c/busses/i2c-sprd.c > index ffc54fbf814d..b44916c6741d 100644 > --- a/drivers/i2c/busses/i2c-sprd.c > +++ b/drivers/i2c/busses/i2c-sprd.c > @@ -343,10 +343,23 @@ static void sprd_i2c_set_clk(struct sprd_i2c *i2c_dev, u32 freq) > writel(div1, i2c_dev->base + ADDR_DVD1); > > /* Start hold timing = hold time(us) * source clock */ > - if (freq == I2C_MAX_FAST_MODE_FREQ) > - writel((6 * apb_clk) / 10000000, i2c_dev->base + ADDR_STA0_DVD); > - else if (freq == I2C_MAX_STANDARD_MODE_FREQ) > + switch (freq) { > + case I2C_MAX_STANDARD_MODE_FREQ: > writel((4 * apb_clk) / 1000000, i2c_dev->base + ADDR_STA0_DVD); > + break; > + case I2C_MAX_FAST_MODE_FREQ: > + writel((6 * apb_clk) / 10000000, i2c_dev->base + ADDR_STA0_DVD); > + break; > + case I2C_MAX_FAST_MODE_PLUS_FREQ: > + writel((8 * apb_clk) / 10000000, i2c_dev->base + ADDR_STA0_DVD); > + break; > + case I2C_MAX_HIGH_SPEED_MODE_FREQ: > + writel((8 * apb_clk) / 10000000, i2c_dev->base + ADDR_STA0_DVD); > + break;
so these were defined but not used.
> + default: > + dev_err(i2c_dev->dev, "Unsupported frequency: %d\n", freq); > + break; > + } > } > > static void sprd_i2c_enable(struct sprd_i2c *i2c_dev) > @@ -519,9 +532,11 @@ static int sprd_i2c_probe(struct platform_device *pdev) > if (!of_property_read_u32(dev->of_node, "clock-frequency", &prop)) > i2c_dev->bus_freq = prop; > > - /* We only support 100k and 400k now, otherwise will return error. */ > + /* We only support 100k\400k\1m\3.4m now, otherwise will return error. */ > if (i2c_dev->bus_freq != I2C_MAX_STANDARD_MODE_FREQ && > - i2c_dev->bus_freq != I2C_MAX_FAST_MODE_FREQ) > + i2c_dev->bus_freq != I2C_MAX_FAST_MODE_FREQ && > + i2c_dev->bus_freq != I2C_MAX_FAST_MODE_PLUS_FREQ && > + i2c_dev->bus_freq != I2C_MAX_HIGH_SPEED_MODE_FREQ) > return -EINVAL;
This is a bit of a weird management of the bus_freq because it goes like this:
i2c_dev->bus_freq = I2C_MAX_STANDARD_MODE_FREQ; ... if (!of_property_read_u32(dev->of_node, "clock-frequency", &prop)) i2c_dev->bus_freq = prop;
if (...) return -EINVAL;
A follow-up cleanup can be removing the first assignement and instead of returning -EINVAL, we can keep going:
if (!of_property_read_u32(dev->of_node, "clock-frequency", &prop)) i2c_dev->bus_freq = prop;
if (...) { dev_warn("..."); i2c_dev->bus_freq = I2C_MAX_STANDARD_MODE_FREQ; }
But this is topic for a different patch.
Andi
> > ret = sprd_i2c_clk_init(i2c_dev); > -- > 2.17.1 >
| |