lkml.org 
[lkml]   [2023]   [Oct]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH V2 2/7] i2c: sprd: Add I2C driver to use 'reset framework' function
From


On 10/23/2023 4:11 PM, Huangzheng Lai wrote:
> Add the 'reset framework' function for I2C drivers, which
> resets the I2C controller when a timeout exception occurs.

Can you explain the situations that can lead to a timeout explicitly?

>
> Signed-off-by: Huangzheng Lai <Huangzheng.Lai@unisoc.com>
> ---
> drivers/i2c/busses/i2c-sprd.c | 19 +++++++++++++++++--
> 1 file changed, 17 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-sprd.c b/drivers/i2c/busses/i2c-sprd.c
> index b44916c6741d..aa602958d4fd 100644
> --- a/drivers/i2c/busses/i2c-sprd.c
> +++ b/drivers/i2c/busses/i2c-sprd.c
> @@ -17,6 +17,7 @@
> #include <linux/of_device.h>
> #include <linux/platform_device.h>
> #include <linux/pm_runtime.h>
> +#include <linux/reset.h>
>
> #define I2C_CTL 0x00
> #define I2C_ADDR_CFG 0x04
> @@ -85,6 +86,7 @@ struct sprd_i2c {
> u32 src_clk;
> u32 bus_freq;
> struct completion complete;
> + struct reset_control *rst;
> u8 *buf;
> u32 count;
> int irq;
> @@ -278,9 +280,17 @@ static int sprd_i2c_handle_msg(struct i2c_adapter *i2c_adap,
>
> time_left = wait_for_completion_timeout(&i2c_dev->complete,
> msecs_to_jiffies(I2C_XFER_TIMEOUT));
> - if (!time_left)
> + if (!time_left) {
> + dev_err(i2c_dev->dev, "transfer timeout, I2C_STATUS = 0x%x\n",
> + readl(i2c_dev->base + I2C_STATUS));
> + if (i2c_dev->rst) {
> + int ret = reset_control_reset(i2c_dev->rst);
> +
> + if (ret < 0)
> + dev_warn(i2c_dev->dev, "i2c soft reset failed, ret = %d\n", ret);
> + }
> return -ETIMEDOUT;
> -
> + }
> return i2c_dev->err;
> }
>
> @@ -544,6 +554,11 @@ static int sprd_i2c_probe(struct platform_device *pdev)
> return ret;
>
> platform_set_drvdata(pdev, i2c_dev);
> + i2c_dev->rst = devm_reset_control_get(i2c_dev->dev, "i2c_rst");

IMO, you need update the device binding file firstly.

> + if (IS_ERR(i2c_dev->rst)) {
> + dev_dbg(i2c_dev->dev, "reset control not configured!\n");
> + i2c_dev->rst = NULL;
> + }
>
> ret = clk_prepare_enable(i2c_dev->clk);
> if (ret)

\
 
 \ /
  Last update: 2023-10-23 13:27    [W:0.374 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site