lkml.org 
[lkml]   [2023]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: at91: pm: set soc_pm.data.mode in at91_pm_secure_init()
Date
From: Thomas Perrot <thomas.perrot@bootlin.com>

In non secure mode, soc_pm.data.mode is set when entering pm in
at91_pm_begin(). This value is used (not only) to determine if the system
is going into slow clock mode (at91_suspend_entering_slow_clock()). This
function is called from various drivers to check this and act accordingly.
If not set, the driver might enter an incorrect suspend mode. When using
secure suspend mode, at91_pm_begin() is not called and thus
soc_pm.data.mode is not set. Since when using secure suspend, only one
suspend mode is supported, set this value directly in
at91_pm_secure_init().

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Thomas Perrot <thomas.perrot@bootlin.com>
---
arch/arm/mach-at91/pm.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 1a26af0fabc7..345b91dc6627 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -1103,6 +1103,7 @@ static void __init at91_pm_secure_init(void)
if (res.a0 == 0) {
pr_info("AT91: Secure PM: suspend mode set to %s\n",
pm_modes[suspend_mode].pattern);
+ soc_pm.data.mode = suspend_mode;
return;
}

@@ -1112,6 +1113,7 @@ static void __init at91_pm_secure_init(void)
res = sam_smccc_call(SAMA5_SMC_SIP_GET_SUSPEND_MODE, 0, 0);
if (res.a0 == 0) {
pr_warn("AT91: Secure PM: failed to get default mode\n");
+ soc_pm.data.mode = -1;
return;
}

@@ -1119,6 +1121,7 @@ static void __init at91_pm_secure_init(void)
pm_modes[suspend_mode].pattern);

soc_pm.data.suspend_mode = res.a1;
+ soc_pm.data.mode = soc_pm.data.suspend_mode;
}
static const struct of_device_id atmel_shdwc_ids[] = {
{ .compatible = "atmel,sama5d2-shdwc" },
--
2.41.0
\
 
 \ /
  Last update: 2023-10-20 15:03    [W:0.047 / U:0.992 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site