lkml.org 
[lkml]   [2023]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 02/18] clk: qcom: add the GCC driver for sa8775p
From


On 9.01.2023 18:44, Bartosz Golaszewski wrote:
> From: Shazad Hussain <quic_shazhuss@quicinc.com>
>
> Add support for the Global Clock Controller found in the QTI SA8775P
> platforms.
>
> Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
> [Bartosz: made the driver ready for upstream]
> Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> ---
[...]

> +
> +static struct gdsc usb20_prim_gdsc = {
> + .gdscr = 0x1C004,
Please use lowercase hex literals outside #defines.

> + .pd = {
> + .name = "usb20_prim_gdsc",
> + },
> + .pwrsts = PWRSTS_OFF_ON,
> +};
> +
[...]

> +
> +static const struct regmap_config gcc_sa8775p_regmap_config = {
> + .reg_bits = 32,
> + .reg_stride = 4,
> + .val_bits = 32,
> + .max_register = 0x472cffc,
This is faaaaar more than what your DT node specifies.

With these two fixed, LGTM:

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
> + .fast_io = true,
> +};
> +
> +static const struct qcom_cc_desc gcc_sa8775p_desc = {
> + .config = &gcc_sa8775p_regmap_config,
> + .clks = gcc_sa8775p_clocks,
> + .num_clks = ARRAY_SIZE(gcc_sa8775p_clocks),
> + .resets = gcc_sa8775p_resets,
> + .num_resets = ARRAY_SIZE(gcc_sa8775p_resets),
> + .gdscs = gcc_sa8775p_gdscs,
> + .num_gdscs = ARRAY_SIZE(gcc_sa8775p_gdscs),
> +};
> +
> +static const struct of_device_id gcc_sa8775p_match_table[] = {
> + { .compatible = "qcom,gcc-sa8775p" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, gcc_sa8775p_match_table);
> +
> +static int gcc_sa8775p_probe(struct platform_device *pdev)
> +{
> + struct regmap *regmap;
> + int ret;
> +
> + regmap = qcom_cc_map(pdev, &gcc_sa8775p_desc);
> + if (IS_ERR(regmap))
> + return PTR_ERR(regmap);
> +
> + ret = qcom_cc_register_rcg_dfs(regmap, gcc_dfs_clocks,
> + ARRAY_SIZE(gcc_dfs_clocks));
> + if (ret)
> + return ret;
> +
> + /*
> + * Keep the clocks always-ON
> + * GCC_CAMERA_AHB_CLK, GCC_CAMERA_XO_CLK, GCC_DISP1_AHB_CLK,
> + * GCC_DISP1_XO_CLK, GCC_DISP_AHB_CLK, GCC_DISP_XO_CLK,
> + * GCC_GPU_CFG_AHB_CLK, GCC_VIDEO_AHB_CLK, GCC_VIDEO_XO_CLK.
> + */
> + regmap_update_bits(regmap, 0x32004, BIT(0), BIT(0));
> + regmap_update_bits(regmap, 0x32020, BIT(0), BIT(0));
> + regmap_update_bits(regmap, 0xc7004, BIT(0), BIT(0));
> + regmap_update_bits(regmap, 0xc7018, BIT(0), BIT(0));
> + regmap_update_bits(regmap, 0x33004, BIT(0), BIT(0));
> + regmap_update_bits(regmap, 0x33018, BIT(0), BIT(0));
> + regmap_update_bits(regmap, 0x7d004, BIT(0), BIT(0));
> + regmap_update_bits(regmap, 0x34004, BIT(0), BIT(0));
> + regmap_update_bits(regmap, 0x34024, BIT(0), BIT(0));
> +
> + return qcom_cc_really_probe(pdev, &gcc_sa8775p_desc, regmap);
> +}
> +
> +static struct platform_driver gcc_sa8775p_driver = {
> + .probe = gcc_sa8775p_probe,
> + .driver = {
> + .name = "gcc-sa8775p",
> + .of_match_table = gcc_sa8775p_match_table,
> + },
> +};
> +
> +static int __init gcc_sa8775p_init(void)
> +{
> + return platform_driver_register(&gcc_sa8775p_driver);
> +}
> +subsys_initcall(gcc_sa8775p_init);
> +
> +static void __exit gcc_sa8775p_exit(void)
> +{
> + platform_driver_unregister(&gcc_sa8775p_driver);
> +}
> +module_exit(gcc_sa8775p_exit);
> +
> +MODULE_DESCRIPTION("Qualcomm SA8775P GCC driver");
> +MODULE_LICENSE("GPL");

\
 
 \ /
  Last update: 2023-03-26 23:33    [W:0.672 / U:1.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site