lkml.org 
[lkml]   [2023]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [PATCH 18/18] arm64: dts: qcom: add initial support for qcom sa8775p-ride
From


On 9.01.2023 18:45, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
>
> This adds basic support for the Qualcomm sa8775p platform and the
> reference board: sa8775p-ride. The dt files describe the basics of the
> SoC and enable booting to shell.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 39 +
> arch/arm64/boot/dts/qcom/sa8775p.dtsi | 841 ++++++++++++++++++++++
> 3 files changed, 881 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sa8775p.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 3e79496292e7..39b8206f7131 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -61,6 +61,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5-vision-mezzanine.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sa8540p-ride.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sa8775p-ride.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> new file mode 100644
> index 000000000000..d4dae32a84cc
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> @@ -0,0 +1,39 @@
> +// SPDX-License-Identifier: GPL-2.0-only
BSD3?

> +/*
> + * Copyright (c) 2023, Linaro Limited
> + */
> +
> +/dts-v1/;
> +
> +#include "sa8775p.dtsi"
> +
> +/ {
> + model = "Qualcomm SA8875P Ride";
> + compatible = "qcom,sa8775p-ride", "qcom,sa8775p";
> +
> + aliases {
> + serial0 = &uart10;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +};
> +
> +&qupv3_id_1 {
> + status = "okay";
> +};
> +
> +&uart10 {
> + compatible = "qcom,geni-debug-uart";
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_uart10_state>;
> +};
> +
> +&tlmm {
> + qup_uart10_state: qup_uart10_state {
the node names (between ':' and '{') should end in -state,
but the label does not have to. In fact, you'll probably want
to have a "default" and a "sleep" state with different drive-strength
and bias properties.

> + pins = "gpio46", "gpio47";
> + function = "qup1_se3";
> + };
> +};
Missing xo rate override.

> diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> new file mode 100644
> index 000000000000..1a3b11628e38
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> @@ -0,0 +1,841 @@
> +// SPDX-License-Identifier: GPL-2.0-only
BSD3?

> +/*
> + * Copyright (c) 2023, Linaro Limited
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/qcom,gcc-sa8775p.h>
> +#include <dt-bindings/clock/qcom,rpmh.h>
> +#include <dt-bindings/interconnect/qcom,sa8775p.h>
> +#include <dt-bindings/power/qcom-rpmpd.h>
> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
> +
> +/ {
> + interrupt-parent = <&intc>;
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + clocks {
> + xo_board_clk: xo-board-clk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + sleep_clk: sleep-clk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32764>;
> + };
> + };
> +
> + cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + CPU0: cpu@0 {
> + device_type = "cpu";
> + compatible = "qcom,kryo";
> + reg = <0x0 0x0>;
> + enable-method = "psci";
> + next-level-cache = <&L2_0>;
> + L2_0: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + L3_0: l3-cache {
> + compatible = "cache";
> + };
> + };
> + };
> +
> + CPU1: cpu@100 {
> + device_type = "cpu";
> + compatible = "qcom,kryo";
> + reg = <0x0 0x100>;
> + enable-method = "psci";
> + cpu-release-addr = <0x0 0x90000000>;
> + next-level-cache = <&L2_1>;
> + L2_1: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU2: cpu@200 {
> + device_type = "cpu";
> + compatible = "qcom,kryo";
> + reg = <0x0 0x200>;
> + enable-method = "psci";
> + next-level-cache = <&L2_2>;
> + L2_2: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU3: cpu@300 {
> + device_type = "cpu";
> + compatible = "qcom,kryo";
> + reg = <0x0 0x300>;
> + enable-method = "psci";
> + next-level-cache = <&L2_3>;
> + L2_3: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU4: cpu@10000 {
> + device_type = "cpu";
> + compatible = "qcom,kryo";
> + reg = <0x0 0x10000>;
> + enable-method = "psci";
> + next-level-cache = <&L2_4>;
> + L2_4: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_1>;
> + L3_1: l3-cache {
> + compatible = "cache";
> + };
> +
> + };
> + };
> +
> + CPU5: cpu@10100 {
> + device_type = "cpu";
> + compatible = "qcom,kryo";
> + reg = <0x0 0x10100>;
> + enable-method = "psci";
> + next-level-cache = <&L2_5>;
> + L2_5: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_1>;
> + };
> + };
> +
> + CPU6: cpu@10200 {
> + device_type = "cpu";
> + compatible = "qcom,kryo";
> + reg = <0x0 0x10200>;
> + enable-method = "psci";
> + next-level-cache = <&L2_6>;
> + L2_6: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_1>;
> + };
> + };
> +
> + CPU7: cpu@10300 {
> + device_type = "cpu";
> + compatible = "qcom,kryo";
> + reg = <0x0 0x10300>;
> + enable-method = "psci";
> + next-level-cache = <&L2_7>;
> + L2_7: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_1>;
> + };
> + };
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&CPU0>;
> + };
> +
> + core1 {
> + cpu = <&CPU1>;
> + };
> +
> + core2 {
> + cpu = <&CPU2>;
> + };
> +
> + core3 {
> + cpu = <&CPU3>;
> + };
> + };
> +
> + cluster1 {
> + core0 {
> + cpu = <&CPU4>;
> + };
> +
> + core1 {
> + cpu = <&CPU5>;
> + };
> +
> + core2 {
> + cpu = <&CPU6>;
> + };
> +
> + core3 {
> + cpu = <&CPU7>;
> + };
> + };
> + };
On other SoCs we define a single DynamIQ cluster, is it something
we should change?
> + };
> +
> + /* Will be updated by the bootloader. */
> + memory {
The memory node should have a unit address, probably 0x80000000 in
your case, but please doublecheck (for example by reading the value
from /sys/firmware/)
> + device_type = "memory";
> + reg = <0 0 0 0>;
0x0 please

> + };
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + sail_ss_mem: sail_ss_region@80000000 {
No underscores in node names, use -s instead.

> + no-map;
> + reg = <0x0 0x80000000 0x0 0x10000000>;
Please put reg above no-map.

> + };
> +
> + hyp_mem: hyp_region@90000000 {
> + no-map;
> + reg = <0x0 0x90000000 0x0 0x600000>;
> + };
> +
> + xbl_boot_mem: xbl_boot_region@90600000 {
> + no-map;
> + reg = <0x0 0x90600000 0x0 0x200000>;
> + };
> +
> + aop_image_mem: aop_image_region@90800000 {
> + no-map;
> + reg = <0x0 0x90800000 0x0 0x60000>;
> + };
> +
> + aop_cmd_db_mem: aop_cmd_db_region@90860000 {
> + compatible = "qcom,cmd-db";
> + no-map;
> + reg = <0x0 0x90860000 0x0 0x20000>;
> + };
> +
> + uefi_log: uefi_log_region@908b0000 {
> + no-map;
> + reg = <0x0 0x908b0000 0x0 0x10000>;
> + };
> +
> + reserved_mem: reserved_region@908f0000 {
> + no-map;
> + reg = <0x0 0x908f0000 0x0 0xf000>;
> + };
> +
> + secdata_apss_mem: secdata_apss_region@908ff000 {
> + no-map;
> + reg = <0x0 0x908ff000 0x0 0x1000>;
> + };
> +
> + smem_mem: smem_region@90900000 {
> + compatible = "qcom,smem";
> + reg = <0x0 0x90900000 0x0 0x200000>;
> + no-map;
> + hwlocks = <&tcsr_mutex 3>;
> + };
> +
> + cpucp_fw_mem: cpucp_fw_region@90b00000 {
> + no-map;
> + reg = <0x0 0x90b00000 0x0 0x100000>;
> + };
> +
> + lpass_machine_learning_mem: lpass_machine_learning_region@93b00000 {
> + no-map;
> + reg = <0x0 0x93b00000 0x0 0xf00000>;
> + };
> +
> + adsp_rpc_remote_heap_mem: adsp_rpc_remote_heap_region@94a00000 {
> + no-map;
> + reg = <0x0 0x94a00000 0x0 0x800000>;
> + };
> +
> + pil_camera_mem: pil_camera_region@95200000 {
> + no-map;
> + reg = <0x0 0x95200000 0x0 0x500000>;
> + };
> +
> + pil_adsp_mem: pil_adsp_region@95c00000 {
> + no-map;
> + reg = <0x0 0x95c00000 0x0 0x1e00000>;
> + };
> +
> + pil_gdsp0_mem: pil_gdsp0_region@97b00000 {
> + no-map;
> + reg = <0x0 0x97b00000 0x0 0x1e00000>;
> + };
> +
> + pil_gdsp1_mem: pil_gdsp1_region@99900000 {
> + no-map;
> + reg = <0x0 0x99900000 0x0 0x1e00000>;
> + };
> +
> + pil_cdsp0_mem: pil_cdsp0_region@9b800000 {
> + no-map;
> + reg = <0x0 0x9b800000 0x0 0x1e00000>;
> + };
> +
> + pil_gpu_mem: pil_gpu_region@9d600000 {
> + no-map;
> + reg = <0x0 0x9d600000 0x0 0x2000>;
> + };
> +
> + pil_cdsp1_mem: pil_cdsp1_region@9d700000 {
> + no-map;
> + reg = <0x0 0x9d700000 0x0 0x1e00000>;
> + };
> +
> + pil_cvp_mem: pil_cvp_region@9f500000 {
> + no-map;
> + reg = <0x0 0x9f500000 0x0 0x700000>;
> + };
> +
> + pil_video_mem: pil_video_region@9fc00000 {
> + no-map;
> + reg = <0x0 0x9fc00000 0x0 0x700000>;
> + };
> +
> + hyptz_reserved_mem: hyptz_reserved_region@beb00000 {
> + no-map;
> + reg = <0x0 0xbeb00000 0x0 0x11500000>;
> + };
> +
> + tz_stat_mem: tz_stat_region@d0000000 {
> + no-map;
> + reg = <0x0 0xd0000000 0x0 0x100000>;
> + };
> +
> + tags_mem: tags_region@d0100000 {
> + no-map;
> + reg = <0x0 0xd0100000 0x0 0x1200000>;
> + };
> +
> + qtee_mem: qtee_region@d1300000 {
> + no-map;
> + reg = <0x0 0xd1300000 0x0 0x500000>;
> + };
> +
> + trusted_apps_mem: trusted_apps_region@d1800000 {
> + no-map;
> + reg = <0x0 0xd1800000 0x0 0x3900000>;
> + };
> +
> + dump_mem: mem_dump_region {
> + compatible = "shared-dma-pool";
> + alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
> + reusable;
> + size = <0 0x3000000>;
> + };
> +
> + /* global autoconfigured region for contiguous allocations */
> + linux,cma {
> + compatible = "shared-dma-pool";
> + alloc-ranges = <0x0 0x00000000 0x0 0xdfffffff>;
> + reusable;
> + alignment = <0x0 0x400000>;
> + size = <0x0 0x2000000>;
> + linux,cma-default;
> + };
Are you sure these last two are useful?

> + };
> +
> + psci {
Top-level nodes should be sorted alphabetically.

> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + firmware {
> + scm {
> + compatible = "qcom,scm";
This one should also have a SoC-specific compatible.

> + };
> + };
> +
> + qup_opp_table_100mhz: qup-100mhz-opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-100000000 {
> + opp-hz = /bits/ 64 <100000000>;
> + required-opps = <&rpmhpd_opp_svs_l1>;
> + };
> + };
> +
> + soc: soc@0 {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0 0xffffffff>;
You probably want 36 or more bits of addressing here, otherwise
SMMU translation will be playing jokes on you, cutting off some
bits..

> +
> + gcc: clock-controller@100000 {
> + compatible = "qcom,gcc-sa8775p";
Please update the compatible after you update it in the .c driver.

> + reg = <0x100000 0xc7018>;
The GCC size is usually something more rounded to 0x1000, can you
doublecheck?

> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + #power-domain-cells = <1>;
> + clocks = <&rpmhcc RPMH_CXO_CLK>,
> + <&sleep_clk>,
> + <0>,
> + <0>,
> + <0>,
> + <0>,
> + <0>,
> + <0>,
> + <0>,
> + <0>,
> + <0>, /* TODO: usb_0_ssphy */
> + <0>,
> + <0>,
> + <0>,
> + <0>;
> + power-domains = <&rpmhpd SA8775P_CX>;

compatible
reg
clocks
#clock-cells
#reset-cells
power-domains
#power-domain-cells

please
> + };
> +
> + ipcc: mailbox@408000 {
> + compatible = "qcom,sa8775p-ipcc", "qcom,ipcc";
> + reg = <0x408000 0x1000>;
> + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + #mbox-cells = <2>;
> + };
> +
> + aggre1_noc:interconnect-aggre1-noc {
> + compatible = "qcom,sa8775p-aggre1-noc";
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + aggre2_noc: interconnect-aggre2-noc {
> + compatible = "qcom,sa8775p-aggre2-noc";
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + clk_virt: interconnect-clk-virt {
> + compatible = "qcom,sa8775p-clk-virt";
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + config_noc: interconnect-config-noc {
> + compatible = "qcom,sa8775p-config-noc";
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + dc_noc: interconnect-dc-noc {
> + compatible = "qcom,sa8775p-dc-noc";
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + gem_noc: interconnect-gem-noc {
> + compatible = "qcom,sa8775p-gem-noc";
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + gpdsp_anoc: interconnect-gpdsp-anoc {
> + compatible = "qcom,sa8775p-gpdsp-anoc";
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + lpass_ag_noc: interconnect-lpass-ag-noc {
> + compatible = "qcom,sa8775p-lpass-ag-noc";
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + mc_virt: interconnect-mc-virt {
> + compatible = "qcom,sa8775p-mc-virt";
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + mmss_noc: interconnect-mmss-noc {
> + compatible = "qcom,sa8775p-mmss-noc";
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + nspa_noc: interconnect-nspa-noc {
> + compatible = "qcom,sa8775p-nspa-noc";
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + nspb_noc: interconnect-nspb-noc {
> + compatible = "qcom,sa8775p-nspb-noc";
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + pcie_anoc: interconnect-pcie-anoc {
> + compatible = "qcom,sa8775p-pcie-anoc";
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + system_noc: interconnect-system-noc {
> + compatible = "qcom,sa8775p-system-noc";
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + intc: interrupt-controller@17a00000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + #redistributor-regions = <1>;
> + redistributor-stride = <0x0 0x20000>;
> + reg = <0x17a00000 0x10000>, /* GICD */
> + <0x17a60000 0x100000>; /* GICR * 8 */
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
compatible
reg
interrupts
interrupt-controller
#interrupt-cells
redistributor-stride
#redistributor-regions

#address-cells
#size-cells
ranges;

please
> + };
> +
> + apps_rsc: rsc@18200000 {
> + compatible = "qcom,rpmh-rsc";
> + reg = <0x18200000 0x10000>,
> + <0x18210000 0x10000>,
> + <0x18220000 0x10000>;
> + reg-names = "drv-0", "drv-1", "drv-2";
> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
Wrong indentation

> + qcom,tcs-offset = <0xd00>;
> + qcom,drv-id = <2>;
> + qcom,tcs-config = <ACTIVE_TCS 2>,
> + <SLEEP_TCS 3>,
> + <WAKE_TCS 3>,
> + <CONTROL_TCS 0>;
> + label = "apps_rsc";
Is it used anywhere?

> +
> + apps_bcm_voter: bcm_voter {
> + compatible = "qcom,bcm-voter";
> + };
> +
> + rpmhcc: clock-controller {
> + compatible = "qcom,sa8775p-rpmh-clk";
> + #clock-cells = <1>;
> + clock-names = "xo";
> + clocks = <&xo_board_clk>;
clocks
clock-names
#clock-cells
please

> + };
> +
> + rpmhpd: power-controller {
> + compatible = "qcom,sa8775p-rpmhpd";
> + #power-domain-cells = <1>;
> + operating-points-v2 = <&rpmhpd_opp_table>;
operating-points-v2
#power-domain-cells
please
> +
> + rpmhpd_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + rpmhpd_opp_ret: opp1 {
> + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
> + };
> +
> + rpmhpd_opp_min_svs: opp2 {
> + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
> + };
> +
> + rpmhpd_opp_low_svs: opp3 {
> + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
> + };
> +
> + rpmhpd_opp_svs: opp4 {
> + opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
> + };
> +
> + rpmhpd_opp_svs_l1: opp5 {
> + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
> + };
> +
> + rpmhpd_opp_nom: opp6 {
> + opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
> + };
> +
> + rpmhpd_opp_nom_l1: opp7 {
> + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
> + };
> +
> + rpmhpd_opp_nom_l2: opp8 {
> + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
> + };
> +
> + rpmhpd_opp_turbo: opp9 {
> + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
> + };
> +
> + rpmhpd_opp_turbo_l1: opp10 {
> + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
> + };
> + };
> + };
> + };
> +
> + arch_timer: timer {
Unnecessary label

> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
Shouldn't the last one be 10?

> + clock-frequency = <19200000>;
Please remove this property, the 100 levels of firmware that boot before
Linux already program this.

> + };
> +
> + memtimer: timer@17c20000 {
Unnecessary label

> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + compatible = "arm,armv7-timer-mem";
> + reg = <0x17c20000 0x1000>;
> + clock-frequency = <19200000>;
Ditto


+ please sort to:
compatible
reg
#addr
#size
ranges
> +
> + frame@17c21000 {
> + frame-number = <0>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c21000 0x1000>,
> + <0x17c22000 0x1000>;
reg
interrupts
frame-number
[status]

please
> + };
> +
> + frame@17c23000 {
> + frame-number = <1>;
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c23000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17c25000 {
> + frame-number = <2>;
> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c25000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17c27000 {
> + frame-number = <3>;
> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c27000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17c29000 {
> + frame-number = <4>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c29000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17c2b000 {
> + frame-number = <5>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c2b000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17c2d000 {
> + frame-number = <6>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x17c2d000 0x1000>;
> + status = "disabled";
> + };
> + };
> +
> + tcsr_mutex: hwlock@1f40000 {
> + compatible = "qcom,tcsr-mutex";
> + reg = <0x1f40000 0x20000>;
> + #hwlock-cells = <1>;
> + };
> +
> + tlmm: pinctrl@f000000 {
> + compatible = "qcom,sa8775p-pinctrl";
> + reg = <0xf000000 0x1000000>;
All address fields under /soc should be padded to 8 hex digits and
nodes should be sorted by their unit address.

> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + gpio-ranges = <&tlmm 0 0 149>;
> + };
> +
> + qcom-wdt@17c10000 {
> + compatible = "qcom,kpss-wdt";
> + reg = <0x17c10000 0x1000>;
> + clocks = <&sleep_clk>;
> + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
Please reorder interrupts and clocks.

> + };
> +
> + qupv3_id_1: geniqup@ac0000 {
> + compatible = "qcom,geni-se-qup";
> + reg = <0xac0000 0x6000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + clock-names = "m-ahb", "s-ahb";
> + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
> + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
> + iommus = <&apps_smmu 0x443 0x0>;
> + status = "disabled";
> +
> + uart10: serial@a8c000 {
> + compatible = "qcom,geni-uart";
> + reg = <0xa8c000 0x4000>;
> + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> + interconnect-names = "qup-core", "qup-config", "qup-memory";
> + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
> + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
> + power-domains = <&rpmhpd SA8775P_CX>;
> + operating-points-v2 = <&qup_opp_table_100mhz>;
> + status = "disabled";
> + };
> + };
> +
> + apps_smmu: apps-smmu@15000000 {
> + compatible = "qcom,sa8775p-smmu-500", "arm,mmu-500";
> + reg = <0x15000000 0x100000>, <0x15182000 0x28>;
Only one reg is used (unless you're nvidia)...

> + reg-names = "base", "tcu-base";
..and this becomes irrelevant.

> + #iommu-cells = <2>;

> + qcom,skip-init;
> + qcom,use-3-lvl-tables;
These two don't exist upstream.
> + #global-interrupts = <2>;

> + #size-cells = <1>;
> + #address-cells = <1>;
> + ranges;
There are no child nodes of SMMU, please remove.
> +
> + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
Bad indentation (or my mail client is drunk again)

Konrad
> + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 912 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 911 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 910 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 909 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 908 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 907 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 906 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 905 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 904 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 902 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 901 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 900 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 899 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 898 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 895 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 894 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 893 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 891 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> +};

\
 
 \ /
  Last update: 2023-03-26 23:33    [W:0.429 / U:0.536 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site