lkml.org 
[lkml]   [2023]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH v2 11/11] arm64: dts: imx8mn: add clocks description
On 23-01-01 18:57:40, Dario Binacchi wrote:
> The patch creates a unique node for each clock in the imx8mn clock
> control module (CCM).
>
> To ensure backwards compatibility it was not possible to separate the
> changes to the device tree from those applied to the clocks setup code.
> In doing so, all clocks are initialized from the device tree and the
> legacy setup code with hardwired parameters is removed.
>
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
>
> ---
>
> (no changes since v1)
>
> .../boot/dts/freescale/imx8mn-clocks.dtsi | 1885 +++++++++++++++++
> arch/arm64/boot/dts/freescale/imx8mn.dtsi | 54 +-
> drivers/clk/imx/clk-imx8mn.c | 714 ++-----
> 3 files changed, 2086 insertions(+), 567 deletions(-)
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-clocks.dtsi
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mn-clocks.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-clocks.dtsi
> new file mode 100644
> index 000000000000..21e02ea996d0
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mn-clocks.dtsi
> @@ -0,0 +1,1885 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Device Tree Source for imx8mn clock data
> + *
> + * Copyright (c) 2022 Amarula Solutions
> + *
> + * Dario Binacchi <dario.binacchi@amarulasolutions.com>
> + */
> +
> +/ {
> + osc_32k: clock-osc-32k {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + clock-output-names = "osc_32k";
> + };
> +

[...]

> +
> + clk_audio_pll2_bypass: clock-audio-pll2-bypass@14 {
> + compatible = "fsl,imx8mn-mux-clock";
> + #clock-cells = <0>;
> + clocks = <&clk_audio_pll2>, <&clk_audio_pll2_ref_sel>;
> + fsl,anatop = <&anatop 0x14>;
> + fsl,bit-shift = <16>;
> + fsl,set-rate-parent;

NACK. I'm sorry, but this creates a huge effort on maintaining the
bindings. Plus the vendor specific properties will keep increasing.

I don't think Rob and Krzysztof will be OK with this either.


> + clock-output-names = "audio_pll2_bypass";
> + };
> +
> + clk_audio_pll2_out: clock-audio-pll2-out@14 {
> + compatible = "fsl,imx8mn-gate-clock";
> + #clock-cells = <0>;
> + clocks = <&clk_audio_pll2_bypass>;
> + fsl,anatop = <&anatop 0x14>;
> + fsl,bit-shift = <13>;
> + clock-output-names = "audio_pll2_out";
> + };
> +

[...]

> --
> 2.32.0
>

\
 
 \ /
  Last update: 2023-03-26 23:43    [W:0.229 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site