lkml.org 
[lkml]   [2022]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 4/4] dt-bindings: remoteproc: qcom: wcnss: Add compatible for pronto v3
On Wed, 21 Sep 2022 10:06:48 +0530, Sireesh Kodali wrote:
> The pronto v3 remoteproc is similar to pronto v2. It is found on the
> MSM8953 platform, which is used by SDM450, SDM625, SDM626, APQ8053 and
> other SoCs. Since the configuration is same on all SoCs, a single
> compatible is used.
>
> Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
> ---
> .../bindings/remoteproc/qcom,wcnss-pil.yaml | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>

Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.

Full log is available here: https://patchwork.ozlabs.org/patch/


remoteproc@fb21b000: 'power-domain-names' is a required property
arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dtb

remoteproc@fb21b000: 'power-domains' is a required property
arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dtb

\
 
 \ /
  Last update: 2022-09-21 10:37    [W:0.061 / U:0.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site