lkml.org 
[lkml]   [2022]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v4 1/4] remoteproc: qcom: qcom_wcnss: Add support for pronto-v3
    Date
    From: Vladimir Lypak <vladimir.lypak@gmail.com>

    Pronto-v3 is similar to pronto-v2. It requires two power domains, and it
    requires the xo clock. It is used on the MSM8953 platform.

    Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
    Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
    ---
    drivers/remoteproc/qcom_wcnss.c | 13 +++++++++++++
    1 file changed, 13 insertions(+)

    diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
    index 68f37296b151..ff18bfae5eb6 100644
    --- a/drivers/remoteproc/qcom_wcnss.c
    +++ b/drivers/remoteproc/qcom_wcnss.c
    @@ -141,6 +141,18 @@ static const struct wcnss_data pronto_v2_data = {
    .num_vregs = 1,
    };

    +static const struct wcnss_data pronto_v3_data = {
    + .pmu_offset = 0x1004,
    + .spare_offset = 0x1088,
    +
    + .pd_names = { "mx", "cx" },
    + .vregs = (struct wcnss_vreg_info[]) {
    + { "vddpx", 1800000, 1800000, 0 },
    + },
    + .num_pd_vregs = 2,
    + .num_vregs = 1,
    +};
    +
    static int wcnss_load(struct rproc *rproc, const struct firmware *fw)
    {
    struct qcom_wcnss *wcnss = (struct qcom_wcnss *)rproc->priv;
    @@ -675,6 +687,7 @@ static const struct of_device_id wcnss_of_match[] = {
    { .compatible = "qcom,riva-pil", &riva_data },
    { .compatible = "qcom,pronto-v1-pil", &pronto_v1_data },
    { .compatible = "qcom,pronto-v2-pil", &pronto_v2_data },
    + { .compatible = "qcom,pronto-v3-pil", &pronto_v3_data },
    { },
    };
    MODULE_DEVICE_TABLE(of, wcnss_of_match);
    --
    2.37.3
    \
     
     \ /
      Last update: 2022-09-21 06:39    [W:4.535 / U:0.028 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site