Messages in this thread | | | Date | Wed, 14 Sep 2022 14:25:32 +0200 | Subject | Re: [PATCH v9,6/7] arm64: dts: mt8195: Add thermal zones and thermal nodes | From | AngeloGioacchino Del Regno <> |
| |
Il 17/08/22 10:07, bchihi@baylibre.com ha scritto: > From: Tinghan Shen <tinghan.shen@mediatek.com> > > Add thermal zones and thermal nodes for the mt8195. > > Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> > Co-developed-by: Ben Tseng <ben.tseng@mediatek.com> > Signed-off-by: Ben Tseng <ben.tseng@mediatek.com> > Co-developed-by: Alexandre Bailon <abailon@baylibre.com> > Signed-off-by: Alexandre Bailon <abailon@baylibre.com> > Co-developed-by: Balsam CHIHI <bchihi@baylibre.com> > Signed-off-by: Balsam CHIHI <bchihi@baylibre.com> > --- > arch/arm64/boot/dts/mediatek/mt8195.dtsi | 111 +++++++++++++++++++++++ > 1 file changed, 111 insertions(+) > > diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi > index 95967a0196d8..aafbbe83e6ba 100644 > --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi > +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi > @@ -10,6 +10,7 @@ > #include <dt-bindings/interrupt-controller/irq.h> > #include <dt-bindings/phy/phy.h> > #include <dt-bindings/pinctrl/mt8195-pinfunc.h> > +#include <dt-bindings/reset/mt8195-resets.h> > > / { > compatible = "mediatek,mt8195"; > @@ -452,6 +453,28 @@ spi0: spi@1100a000 { > status = "disabled"; > }; > > + lvts_ap: thermal-sensor@1100b000 { > + compatible = "mediatek,mt8195-lvts-ap"; > + #thermal-sensor-cells = <1>; > + reg = <0 0x1100b000 0 0x1000>; > + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>; > + clocks = <&infracfg_ao CLK_INFRA_AO_THERM>; > + resets = <&infracfg_ao MT8195_INFRA_RST0_THERM_CTRL_SWRST>; > + nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>; > + nvmem-cell-names = "lvts_calib_data1", "lvts_calib_data2"; > + }; > + > + lvts_mcu: thermal-sensor@11278000 {
Please keep the devicetree nodes ordered by address. This one must be moved between mmc@1125000 and usb@11290000.
Regards, Angelo
> + compatible = "mediatek,mt8195-lvts-mcu"; > + #thermal-sensor-cells = <1>; > + reg = <0 0x11278000 0 0x1000>; > + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>; > + clocks = <&infracfg_ao CLK_INFRA_AO_THERM>; > + resets = <&infracfg_ao MT8195_INFRA_RST4_THERM_CTRL_MCU_SWRST>; > + nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>; > + nvmem-cell-names = "lvts_calib_data1", "lvts_calib_data2"; > + }; > + > spi1: spi@11010000 { > compatible = "mediatek,mt8195-spi", > "mediatek,mt6765-spi";
| |