lkml.org 
[lkml]   [2022]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v9,2/7] dt-bindings: thermal: Add dt-binding document for LVTS thermal controllers
From
On 17/08/2022 11:07, bchihi@baylibre.com wrote:
> From: Alexandre Bailon <abailon@baylibre.com>
>
> Add dt-binding document for mt8192 and mt8195 LVTS thermal controllers.

Rebase your patchset on decent kernel tree. You seem to use something a
bit old.

>
> Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
> Co-developed-by: Balsam CHIHI <bchihi@baylibre.com>
> Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
> ---
> .../thermal/mediatek,lvts-thermal.yaml | 152 ++++++++++++++++++
> 1 file changed, 152 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
>
> diff --git a/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
> new file mode 100644
> index 000000000000..31d9e220513a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
> @@ -0,0 +1,152 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/thermal/mediatek,lvts-thermal.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek SoC LVTS thermal controller
> +
> +maintainers:
> + - Yu-Chia Chang <ethan.chang@mediatek.com>
> + - Ben Tseng <ben.tseng@mediatek.com>
> +
> +description: |
> + LVTS (Low Voltage Thermal Sensor).
> + The architecture will be first used on mt8192 and mt8195.
> +
> +properties:
> + compatible:
> + enum:
> + - mediatek,mt8192-lvts-ap
> + - mediatek,mt8192-lvts-mcu
> + - mediatek,mt8195-lvts-ap
> + - mediatek,mt8195-lvts-mcu
> +
> + "#thermal-sensor-cells":
> + const: 1
> +
> + reg:
> + maxItems: 1
> + description: LVTS instance registers.
> +
> + interrupts:
> + maxItems: 1
> + description: LVTS instance interrupts.
> +
> + clocks:
> + maxItems: 1
> + description: LVTS instance clock.

Skip all these three descriptions. They are obvious.

> +
> + resets:
> + maxItems: 1
> + description: |
> + LVTS instance SW reset for HW AP/MCU domain to clean temporary data
> + on HW initialization/resume.
> +
> + nvmem-cells:
> + minItems: 1
> + maxItems: 2
> + description: Calibration efuse data for LVTS
> +
> + nvmem-cell-names:
> + minItems: 1
> + maxItems: 2
> + description: Calibration efuse cell names for LVTS
> +
> +allOf:
> + - $ref: thermal-sensor.yaml#
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - mediatek,mt8192-lvts-ap
> + - mediatek,mt8192-lvts-mcu
> + then:
> + properties:
> + nvmem-cells:
> + items:
> + - description: Calibration efuse data for LVTS
> +
> + nvmem-cell-names:
> + items:
> + - const: lvts_calib_data1
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - mediatek,mt8195-lvts-ap
> + - mediatek,mt8195-lvts-mcu
> + then:
> + properties:
> + nvmem-cells:
> + items:
> + - description: Calibration efuse data 1 for LVTS
> + - description: Calibration efuse data 2 for LVTS
> +
> + nvmem-cell-names:
> + items:
> + - const: lvts_calib_data1
> + - const: lvts_calib_data2
> +
> +required:
> + - compatible
> + - '#thermal-sensor-cells'

Use consistent quotes: either ' or "

> + - reg
> + - interrupts
> + - clocks
> + - resets
> + - nvmem-cells
> + - nvmem-cell-names
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/mt8192-clk.h>
> + #include <dt-bindings/reset/mt8192-resets.h>
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + lvts_ap: thermal-sensor@1100b000 {
> + compatible = "mediatek,mt8192-lvts-ap";
> + #thermal-sensor-cells = <1>;
> + reg = <0 0x1100b000 0 0x1000>;

Convention is: compatible, then reg, then the rest of properties

> + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&infracfg CLK_INFRA_THERM>;
> + resets = <&infracfg MT8192_INFRA_RST0_THERM_CTRL_SWRST>;
> + nvmem-cells = <&lvts_e_data1>;
> + nvmem-cell-names = "lvts_calib_data1";
> + };
> +
> + lvts_mcu: thermal-sensor@11278000 {
> + compatible = "mediatek,mt8192-lvts-mcu";
> + #thermal-sensor-cells = <1>;
> + reg = <0 0x11278000 0 0x1000>;
> + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&infracfg CLK_INFRA_THERM>;
> + resets = <&infracfg MT8192_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
> + nvmem-cells = <&lvts_e_data1>;
> + nvmem-cell-names = "lvts_calib_data1";
> + };
> + };

This part is the same as previous, so just skip it or replace with an
example which is different somehow.

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-08-18 15:50    [W:0.211 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site