Messages in this thread | | | Date | Tue, 13 Sep 2022 11:20:04 +0300 | Subject | Re: [PATCH net-next 3/3] dt-bindings: net: dsa: remove label = "cpu" from examples | From | Arınç ÜNAL <> |
| |
On 12.09.2022 20:50, Vladimir Oltean wrote: > This is not used by the DSA dt-binding, so remove it from all examples. > > Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Is there also a plan to remove this from every devicetree on mainline that has got this property on the CPU port?
I'd like to do the same on the DTs on OpenWrt.
Arınç
> --- > Documentation/devicetree/bindings/net/dsa/ar9331.txt | 1 - > .../devicetree/bindings/net/dsa/arrow,xrs700x.yaml | 1 - > Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml | 2 -- > .../devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml | 1 - > Documentation/devicetree/bindings/net/dsa/lan9303.txt | 2 -- > Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt | 1 - > .../devicetree/bindings/net/dsa/mediatek,mt7530.yaml | 7 ------- > .../devicetree/bindings/net/dsa/microchip,ksz.yaml | 2 -- > Documentation/devicetree/bindings/net/dsa/qca8k.yaml | 3 --- > Documentation/devicetree/bindings/net/dsa/realtek.yaml | 2 -- > .../devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml | 1 - > .../devicetree/bindings/net/dsa/vitesse,vsc73xx.txt | 2 -- > 12 files changed, 25 deletions(-) > > diff --git a/Documentation/devicetree/bindings/net/dsa/ar9331.txt b/Documentation/devicetree/bindings/net/dsa/ar9331.txt > index 320607cbbb17..f824fdae0da2 100644 > --- a/Documentation/devicetree/bindings/net/dsa/ar9331.txt > +++ b/Documentation/devicetree/bindings/net/dsa/ar9331.txt > @@ -76,7 +76,6 @@ eth1: ethernet@1a000000 { > > switch_port0: port@0 { > reg = <0x0>; > - label = "cpu"; > ethernet = <ð1>; > > phy-mode = "gmii"; > diff --git a/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml b/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml > index eb01a8f37ce4..259a0c6547f3 100644 > --- a/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml > +++ b/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml > @@ -61,7 +61,6 @@ examples: > }; > ethernet-port@3 { > reg = <3>; > - label = "cpu"; > ethernet = <&fec1>; > phy-mode = "rgmii-id"; > > diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml > index 2e01371b8288..1219b830b1a4 100644 > --- a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml > +++ b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml > @@ -169,7 +169,6 @@ examples: > > port@8 { > reg = <8>; > - label = "cpu"; > phy-mode = "rgmii-txid"; > ethernet = <ð0>; > fixed-link { > @@ -252,7 +251,6 @@ examples: > > port@8 { > ethernet = <&amac2>; > - label = "cpu"; > reg = <8>; > phy-mode = "internal"; > > diff --git a/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml b/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml > index 1ff44dd68a61..73b774eadd0b 100644 > --- a/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml > +++ b/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml > @@ -91,7 +91,6 @@ examples: > > port@0 { > reg = <0>; > - label = "cpu"; > ethernet = <&gmac0>; > phy-mode = "mii"; > > diff --git a/Documentation/devicetree/bindings/net/dsa/lan9303.txt b/Documentation/devicetree/bindings/net/dsa/lan9303.txt > index 464d6bf87605..46a732087f5c 100644 > --- a/Documentation/devicetree/bindings/net/dsa/lan9303.txt > +++ b/Documentation/devicetree/bindings/net/dsa/lan9303.txt > @@ -46,7 +46,6 @@ I2C managed mode: > > port@0 { /* RMII fixed link to master */ > reg = <0>; > - label = "cpu"; > ethernet = <&master>; > }; > > @@ -83,7 +82,6 @@ MDIO managed mode: > > port@0 { > reg = <0>; > - label = "cpu"; > ethernet = <&master>; > }; > > diff --git a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt > index e3829d3e480e..8bb1eff21cb1 100644 > --- a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt > +++ b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt > @@ -96,7 +96,6 @@ switch@e108000 { > > port@6 { > reg = <0x6>; > - label = "cpu"; > ethernet = <ð0>; > }; > }; > diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml > index 84bb36cab518..bc6446e1f55a 100644 > --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml > +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml > @@ -325,7 +325,6 @@ examples: > > port@6 { > reg = <6>; > - label = "cpu"; > ethernet = <&gmac0>; > phy-mode = "rgmii"; > > @@ -389,7 +388,6 @@ examples: > > port@6 { > reg = <6>; > - label = "cpu"; > ethernet = <&gmac0>; > phy-mode = "trgmii"; > > @@ -454,7 +452,6 @@ examples: > > port@6 { > reg = <6>; > - label = "cpu"; > ethernet = <&gmac0>; > phy-mode = "2500base-x"; > > @@ -521,7 +518,6 @@ examples: > > port@6 { > reg = <6>; > - label = "cpu"; > ethernet = <&gmac0>; > phy-mode = "trgmii"; > > @@ -610,7 +606,6 @@ examples: > > port@6 { > reg = <6>; > - label = "cpu"; > ethernet = <&gmac0>; > phy-mode = "trgmii"; > > @@ -699,7 +694,6 @@ examples: > > port@6 { > reg = <6>; > - label = "cpu"; > ethernet = <&gmac0>; > phy-mode = "trgmii"; > > @@ -787,7 +781,6 @@ examples: > > port@6 { > reg = <6>; > - label = "cpu"; > ethernet = <&gmac0>; > phy-mode = "trgmii"; > > diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml > index 456802affc9d..4da75b1f9533 100644 > --- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml > +++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml > @@ -107,7 +107,6 @@ examples: > }; > port@5 { > reg = <5>; > - label = "cpu"; > ethernet = <ð0>; > phy-mode = "rgmii"; > > @@ -146,7 +145,6 @@ examples: > }; > port@6 { > reg = <6>; > - label = "cpu"; > ethernet = <ð0>; > phy-mode = "rgmii"; > > diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml > index f3c88371d76c..978162df51f7 100644 > --- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml > +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml > @@ -159,7 +159,6 @@ examples: > > port@0 { > reg = <0>; > - label = "cpu"; > ethernet = <&gmac1>; > phy-mode = "rgmii"; > > @@ -221,7 +220,6 @@ examples: > > port@0 { > reg = <0>; > - label = "cpu"; > ethernet = <&gmac1>; > phy-mode = "rgmii"; > > @@ -268,7 +266,6 @@ examples: > > port@6 { > reg = <0>; > - label = "cpu"; > ethernet = <&gmac1>; > phy-mode = "sgmii"; > > diff --git a/Documentation/devicetree/bindings/net/dsa/realtek.yaml b/Documentation/devicetree/bindings/net/dsa/realtek.yaml > index 4f99aff029dc..1a7d45a8ad66 100644 > --- a/Documentation/devicetree/bindings/net/dsa/realtek.yaml > +++ b/Documentation/devicetree/bindings/net/dsa/realtek.yaml > @@ -189,7 +189,6 @@ examples: > }; > port@5 { > reg = <5>; > - label = "cpu"; > ethernet = <&gmac0>; > phy-mode = "rgmii"; > fixed-link { > @@ -277,7 +276,6 @@ examples: > }; > port@6 { > reg = <6>; > - label = "cpu"; > ethernet = <&fec1>; > phy-mode = "rgmii"; > tx-internal-delay-ps = <2000>; > diff --git a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml > index 14a1f0b4c32b..7ca9c19a157c 100644 > --- a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml > +++ b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml > @@ -130,7 +130,6 @@ examples: > port@4 { > reg = <4>; > ethernet = <&gmac2>; > - label = "cpu"; > phy-mode = "internal"; > > fixed-link { > diff --git a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt > index bbf4a13f6d75..258bef483673 100644 > --- a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt > +++ b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt > @@ -75,7 +75,6 @@ switch@0 { > }; > vsc: port@6 { > reg = <6>; > - label = "cpu"; > ethernet = <&gmac1>; > phy-mode = "rgmii"; > fixed-link { > @@ -117,7 +116,6 @@ switch@2,0 { > }; > vsc: port@6 { > reg = <6>; > - label = "cpu"; > ethernet = <&enet0>; > phy-mode = "rgmii"; > fixed-link {
| |