lkml.org 
[lkml]   [2022]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 3/3] dt-bindings: bus: Add Freescale i.MX8qxp pixel link MSI bus binding
From
Date
On Wed, 2022-08-03 at 17:37 -0600, Rob Herring wrote:
> On Wed, Aug 03, 2022 at 09:24:21AM +0800, Liu Ying wrote:
> > Freescale i.MX8qxp pixel link MSI bus is a simple memory-mapped
> > bus.
> > It is used to access peripherals in i.MX8qm/qxp imaging, LVDS, MIPI
> > DSI and HDMI TX subsystems, like I2C controller, PWM controller,
> > MIPI DSI controller and Control and Status Registers (CSR) module.
> >
> > Reference simple-pm-bus bindings and add Freescale i.MX8qxp pixel
> > link MSI bus specific bindings.
> >
> > Signed-off-by: Liu Ying <victor.liu@nxp.com>
> > ---
> > v1->v2:
> > Address Krzysztof's comments:
> > * Add a select to explicitly select the MSI bus dt-binding.
> > * List 'simple-pm-bus' explicitly as one item of compatible
> > strings.
> > * Require compatible and reg properties.
> > * Put reg property just after compatible property in example.
> >
> > .../bus/fsl,imx8qxp-pixel-link-msi-bus.yaml | 97
> > +++++++++++++++++++
> > 1 file changed, 97 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-
> > bus.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/bus/fsl,imx8qxp-
> > pixel-link-msi-bus.yaml
> > b/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-
> > bus.yaml
> > new file mode 100644
> > index 000000000000..358c032041e5
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-
> > msi-bus.yaml
> > @@ -0,0 +1,97 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id:
> > https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fbus%2Ffsl%2Cimx8qxp-pixel-link-msi-bus.yaml%23&amp;data=05%7C01%7Cvictor.liu%40nxp.com%7C3ce426916ec64ab9089708da75a92be5%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637951666695217514%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&amp;sdata=qKEVrlyUkszZ%2FQyYeTIF9AoEqYvCiJjwVTIflzYiyOY%3D&amp;reserved=0
> > +$schema:
> > https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23&amp;data=05%7C01%7Cvictor.liu%40nxp.com%7C3ce426916ec64ab9089708da75a92be5%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637951666695217514%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&amp;sdata=hhwFjqe3xmBtdrbG0EwtpGv%2By3jD%2Bm6OXN3hK6WQw4A%3D&amp;reserved=0
> > +
> > +title: Freescale i.MX8qxp Pixel Link Medium Speed Interconnect
> > (MSI) Bus
> > +
> > +maintainers:
> > + - Liu Ying <victor.liu@nxp.com>
> > +
> > +description: |
> > + i.MX8qxp pixel link MSI bus is used to control settings of PHYs,
> > I/Os
> > + sitting together with the PHYs. It is not the same as the MSI
> > bus coming
> > + from i.MX8 System Controller Unit (SCU) which is used to control
> > power,
> > + clock and reset through the i.MX8 Distributed Slave System
> > Controller (DSC).
> > +
> > + i.MX8qxp pixel link MSI bus is a simple memory-mapped bus. Two
> > input clocks,
> > + that is, MSI clock and AHB clock, need to be enabled so that
> > peripherals
> > + connected to the bus can be accessed. Also, the bus is part of a
> > power
> > + domain. The power domain needs to be enabled before the
> > peripherals can
> > + be accessed.
> > +
> > + Peripherals in i.MX8qm/qxp imaging, LVDS, MIPI DSI and HDMI TX
> > subsystems,
> > + like I2C controller, PWM controller, MIPI DSI controller and
> > Control and
> > + Status Registers (CSR) module, are accessed through the bus.
> > +
> > + The i.MX System Controller Firmware (SCFW) owns and uses the
> > i.MX8qm/qxp
> > + pixel link MSI bus controller and does not allow SCFW user to
> > control it.
> > + So, the controller's registers cannot be accessed by SCFW user.
> > Hence,
> > + the interrupts generated by the controller don't make any sense
> > from SCFW
> > + user's point of view.
> > +
> > +allOf:
> > + - $ref: simple-pm-bus.yaml#
> > +
> > +# We need a select here so we don't match all nodes with 'simple-
> > pm-bus'.
> > +select:
> > + properties:
> > + compatible:
> > + contains:
> > + enum:
> > + - fsl,imx8qxp-display-pixel-link-msi-bus
> > + - fsl,imx8qm-display-pixel-link-msi-bus
> > + required:
> > + - compatible
> > +
> > +properties:
> > + compatible:
> > + items:
> > + - enum:
> > + - fsl,imx8qxp-display-pixel-link-msi-bus
> > + - fsl,imx8qm-display-pixel-link-msi-bus
> > + - const: simple-pm-bus
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + clocks:
> > + items:
> > + - description: master gated clock from system
> > + - description: AHB clock
> > +
> > + clock-names:
> > + items:
> > + - const: msi
> > + - const: ahb
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - clocks
> > + - clock-names
> > + - power-domains
> > +
> > +unevaluatedProperties: false
>
> No child nodes allowed?

Should be allowed.

I'll add a pattern property to allow child nodes.

Thanks,
Liu Ying

>
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/clock/imx8-lpcg.h>
> > + #include <dt-bindings/firmware/imx/rsrc.h>
> > + bus@56200000 {
> > + compatible = "fsl,imx8qxp-display-pixel-link-msi-bus",
> > "simple-pm-bus";
> > + reg = <0x56200000 0x20000>;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + interrupt-parent = <&dc0_irqsteer>;
> > + interrupts = <320>;
> > + ranges;
> > + clocks = <&dc0_disp_ctrl_link_mst0_lpcg IMX_LPCG_CLK_4>,
> > + <&dc0_disp_ctrl_link_mst0_lpcg IMX_LPCG_CLK_4>;
> > + clock-names = "msi", "ahb";
> > + power-domains = <&pd IMX_SC_R_DC_0>;
> > + };
> > --
> > 2.25.1
> >
> >

\
 
 \ /
  Last update: 2022-08-04 07:54    [W:0.090 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site