lkml.org 
[lkml]   [2022]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/3] drivers: bus: Add Freescale i.MX8qxp pixel link MSI bus support
Date
Hi,

This series aims to add Freescale i.MX8qxp pixel link MSI bus support
by using the existing simple-pm-bus driver. A power domain and two input
clocks need to be enabled before the MSI bus accesses it's child devices,
which matches what a simple power-managed bus is(See simple-pm-bus.yaml).

Patch 1 adds support to populate simple MFD child devices in the
simple-pm-bus driver, since the MSI bus may connect those devices.

Patch 2 enables/disables functional clock(s) as a bulk in the
simple-pm-bus driver when the simple-pm-bus is being power managed,
since the MSI bus takes the two input clocks as functional clocks.

Patch 3 adds dt-bindings for the MSI bus.

v1->v2:
Address Krzysztof's comments on patch 3:
* Add a select to explicitly select the MSI bus dt-binding.
* List 'simple-pm-bus' explicitly as one item of compatible strings.
* Require compatible and reg properties.
* Put reg property just after compatible property in example.

Liu Ying (3):
drivers: bus: simple-pm-bus: Populate simple MFD child devices
drivers: bus: simple-pm-bus: Use clocks
dt-bindings: bus: Add Freescale i.MX8qxp pixel link MSI bus binding

.../bus/fsl,imx8qxp-pixel-link-msi-bus.yaml | 97 +++++++++++++++++++
drivers/bus/simple-pm-bus.c | 61 +++++++++++-
2 files changed, 157 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml

--
2.25.1

\
 
 \ /
  Last update: 2022-08-03 03:23    [W:0.105 / U:0.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site