lkml.org 
[lkml]   [2022]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 3/3] dt-bindings: bus: Add Freescale i.MX8qxp pixel link MSI bus binding
On Wed, Aug 03, 2022 at 09:24:21AM +0800, Liu Ying wrote:
> Freescale i.MX8qxp pixel link MSI bus is a simple memory-mapped bus.
> It is used to access peripherals in i.MX8qm/qxp imaging, LVDS, MIPI
> DSI and HDMI TX subsystems, like I2C controller, PWM controller,
> MIPI DSI controller and Control and Status Registers (CSR) module.
>
> Reference simple-pm-bus bindings and add Freescale i.MX8qxp pixel
> link MSI bus specific bindings.
>
> Signed-off-by: Liu Ying <victor.liu@nxp.com>
> ---
> v1->v2:
> Address Krzysztof's comments:
> * Add a select to explicitly select the MSI bus dt-binding.
> * List 'simple-pm-bus' explicitly as one item of compatible strings.
> * Require compatible and reg properties.
> * Put reg property just after compatible property in example.
>
> .../bus/fsl,imx8qxp-pixel-link-msi-bus.yaml | 97 +++++++++++++++++++
> 1 file changed, 97 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml
>
> diff --git a/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml b/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml
> new file mode 100644
> index 000000000000..358c032041e5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml
> @@ -0,0 +1,97 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale i.MX8qxp Pixel Link Medium Speed Interconnect (MSI) Bus
> +
> +maintainers:
> + - Liu Ying <victor.liu@nxp.com>
> +
> +description: |
> + i.MX8qxp pixel link MSI bus is used to control settings of PHYs, I/Os
> + sitting together with the PHYs. It is not the same as the MSI bus coming
> + from i.MX8 System Controller Unit (SCU) which is used to control power,
> + clock and reset through the i.MX8 Distributed Slave System Controller (DSC).
> +
> + i.MX8qxp pixel link MSI bus is a simple memory-mapped bus. Two input clocks,
> + that is, MSI clock and AHB clock, need to be enabled so that peripherals
> + connected to the bus can be accessed. Also, the bus is part of a power
> + domain. The power domain needs to be enabled before the peripherals can
> + be accessed.
> +
> + Peripherals in i.MX8qm/qxp imaging, LVDS, MIPI DSI and HDMI TX subsystems,
> + like I2C controller, PWM controller, MIPI DSI controller and Control and
> + Status Registers (CSR) module, are accessed through the bus.
> +
> + The i.MX System Controller Firmware (SCFW) owns and uses the i.MX8qm/qxp
> + pixel link MSI bus controller and does not allow SCFW user to control it.
> + So, the controller's registers cannot be accessed by SCFW user. Hence,
> + the interrupts generated by the controller don't make any sense from SCFW
> + user's point of view.
> +
> +allOf:
> + - $ref: simple-pm-bus.yaml#
> +
> +# We need a select here so we don't match all nodes with 'simple-pm-bus'.
> +select:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - fsl,imx8qxp-display-pixel-link-msi-bus
> + - fsl,imx8qm-display-pixel-link-msi-bus
> + required:
> + - compatible
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - fsl,imx8qxp-display-pixel-link-msi-bus
> + - fsl,imx8qm-display-pixel-link-msi-bus
> + - const: simple-pm-bus
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + items:
> + - description: master gated clock from system
> + - description: AHB clock
> +
> + clock-names:
> + items:
> + - const: msi
> + - const: ahb
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - power-domains
> +
> +unevaluatedProperties: false

No child nodes allowed?

> +
> +examples:
> + - |
> + #include <dt-bindings/clock/imx8-lpcg.h>
> + #include <dt-bindings/firmware/imx/rsrc.h>
> + bus@56200000 {
> + compatible = "fsl,imx8qxp-display-pixel-link-msi-bus", "simple-pm-bus";
> + reg = <0x56200000 0x20000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + interrupt-parent = <&dc0_irqsteer>;
> + interrupts = <320>;
> + ranges;
> + clocks = <&dc0_disp_ctrl_link_mst0_lpcg IMX_LPCG_CLK_4>,
> + <&dc0_disp_ctrl_link_mst0_lpcg IMX_LPCG_CLK_4>;
> + clock-names = "msi", "ahb";
> + power-domains = <&pd IMX_SC_R_DC_0>;
> + };
> --
> 2.25.1
>
>

\
 
 \ /
  Last update: 2022-08-04 01:38    [W:0.194 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site