lkml.org 
[lkml]   [2022]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] usb/serial: fix repeated words in comments
Date
Hi,
On 21/08/2022 16:34, Jilin Yuan wrote:
> Delete the redundant word 'more'.
>
> Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
> ---
> drivers/usb/serial/mct_u232.h | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h
> index e3d09a83cab1..f79a1f1b6a98 100644
> --- a/drivers/usb/serial/mct_u232.h
> +++ b/drivers/usb/serial/mct_u232.h
> @@ -273,13 +273,13 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial,
> * Bit 5: Data Set Ready (DSR). Reflects the state of the DSR line on the UART.
> * Bit 4: Clear To Send (CTS). Reflects the state of the CTS line on the UART.
> * Bit 3: Delta Data Carrier Detect (DDCD). Set to "1" if the -DCD line has
> - * changed state one more more times since the last time the MSR was
> + * changed state one more times since the last time the MSR was

This does not really make much sense before or after the patch.
Should it read: "one or more times"?

Thanks,
Conor.

> * read by the host.
> * Bit 2: Trailing Edge Ring Indicator (TERI). Set to "1" if the -RI line has
> * had a low to high transition since the last time the MSR was read by
> * the host.
> * Bit 1: Delta Data Set Ready (DDSR). Set to "1" if the -DSR line has changed
> - * state one more more times since the last time the MSR was read by the
> + * state one more times since the last time the MSR was read by the
> * host.
> * Bit 0: Delta Clear To Send (DCTS). Set to "1" if the -CTS line has changed
> * state one more times since the last time the MSR was read by the
\
 
 \ /
  Last update: 2022-08-21 17:44    [W:0.036 / U:0.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site