lkml.org 
[lkml]   [2022]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] usb/serial: fix repeated words in comments
Date
 Delete the redundant word 'more'.

Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
---
drivers/usb/serial/mct_u232.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h
index e3d09a83cab1..f79a1f1b6a98 100644
--- a/drivers/usb/serial/mct_u232.h
+++ b/drivers/usb/serial/mct_u232.h
@@ -273,13 +273,13 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial,
* Bit 5: Data Set Ready (DSR). Reflects the state of the DSR line on the UART.
* Bit 4: Clear To Send (CTS). Reflects the state of the CTS line on the UART.
* Bit 3: Delta Data Carrier Detect (DDCD). Set to "1" if the -DCD line has
- * changed state one more more times since the last time the MSR was
+ * changed state one more times since the last time the MSR was
* read by the host.
* Bit 2: Trailing Edge Ring Indicator (TERI). Set to "1" if the -RI line has
* had a low to high transition since the last time the MSR was read by
* the host.
* Bit 1: Delta Data Set Ready (DDSR). Set to "1" if the -DSR line has changed
- * state one more more times since the last time the MSR was read by the
+ * state one more times since the last time the MSR was read by the
* host.
* Bit 0: Delta Clear To Send (DCTS). Set to "1" if the -CTS line has changed
* state one more times since the last time the MSR was read by the
--
2.36.1
\
 
 \ /
  Last update: 2022-08-21 17:35    [W:0.039 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site