lkml.org 
[lkml]   [2022]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v1 05/10] net: dsa: microchip: ksz8795: add error handling to ksz8_r/w_phy
Date
Now ksz_pread/ksz_pwrite can return error value. So, make use of it.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
drivers/net/dsa/microchip/ksz8795.c | 102 ++++++++++++++++++++++------
1 file changed, 81 insertions(+), 21 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 4b39666cfc9c..1aaf765611e8 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -560,14 +560,24 @@ int ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val)
u8 val1, val2;
u16 data = 0;
u8 p = phy;
+ int ret;

regs = dev->info->regs;

switch (reg) {
case MII_BMCR:
- ksz_pread8(dev, p, regs[P_NEG_RESTART_CTRL], &restart);
- ksz_pread8(dev, p, regs[P_SPEED_STATUS], &speed);
- ksz_pread8(dev, p, regs[P_FORCE_CTRL], &ctrl);
+ ret = ksz_pread8(dev, p, regs[P_NEG_RESTART_CTRL], &restart);
+ if (ret)
+ return ret;
+
+ ret = ksz_pread8(dev, p, regs[P_SPEED_STATUS], &speed);
+ if (ret)
+ return ret;
+
+ ret = ksz_pread8(dev, p, regs[P_FORCE_CTRL], &ctrl);
+ if (ret)
+ return ret;
+
if (restart & PORT_PHY_LOOPBACK)
data |= BMCR_LOOPBACK;
if (ctrl & PORT_FORCE_100_MBIT)
@@ -597,7 +607,10 @@ int ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val)
data |= KSZ886X_BMCR_DISABLE_LED;
break;
case MII_BMSR:
- ksz_pread8(dev, p, regs[P_LINK_STATUS], &link);
+ ret = ksz_pread8(dev, p, regs[P_LINK_STATUS], &link);
+ if (ret)
+ return ret;
+
data = BMSR_100FULL |
BMSR_100HALF |
BMSR_10FULL |
@@ -618,7 +631,10 @@ int ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val)
data = KSZ8795_ID_LO;
break;
case MII_ADVERTISE:
- ksz_pread8(dev, p, regs[P_LOCAL_CTRL], &ctrl);
+ ret = ksz_pread8(dev, p, regs[P_LOCAL_CTRL], &ctrl);
+ if (ret)
+ return ret;
+
data = ADVERTISE_CSMA;
if (ctrl & PORT_AUTO_NEG_SYM_PAUSE)
data |= ADVERTISE_PAUSE_CAP;
@@ -632,7 +648,10 @@ int ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val)
data |= ADVERTISE_10HALF;
break;
case MII_LPA:
- ksz_pread8(dev, p, regs[P_REMOTE_STATUS], &link);
+ ret = ksz_pread8(dev, p, regs[P_REMOTE_STATUS], &link);
+ if (ret)
+ return ret;
+
data = LPA_SLCT;
if (link & PORT_REMOTE_SYM_PAUSE)
data |= LPA_PAUSE_CAP;
@@ -648,8 +667,14 @@ int ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val)
data |= LPA_LPACK;
break;
case PHY_REG_LINK_MD:
- ksz_pread8(dev, p, REG_PORT_LINK_MD_CTRL, &val1);
- ksz_pread8(dev, p, REG_PORT_LINK_MD_RESULT, &val2);
+ ret = ksz_pread8(dev, p, REG_PORT_LINK_MD_CTRL, &val1);
+ if (ret)
+ return ret;
+
+ ret = ksz_pread8(dev, p, REG_PORT_LINK_MD_RESULT, &val2);
+ if (ret)
+ return ret;
+
if (val1 & PORT_START_CABLE_DIAG)
data |= PHY_START_CABLE_DIAG;

@@ -664,7 +689,10 @@ int ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val)
FIELD_GET(PORT_CABLE_FAULT_COUNTER_L, val2));
break;
case PHY_REG_PHY_CTRL:
- ksz_pread8(dev, p, regs[P_LINK_STATUS], &link);
+ ret = ksz_pread8(dev, p, regs[P_LINK_STATUS], &link);
+ if (ret)
+ return ret;
+
if (link & PORT_MDIX_STATUS)
data |= KSZ886X_CTRL_MDIX_STAT;
break;
@@ -683,6 +711,7 @@ int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
u8 restart, speed, ctrl, data;
const u16 *regs;
u8 p = phy;
+ int ret;

regs = dev->info->regs;

@@ -692,15 +721,26 @@ int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
/* Do not support PHY reset function. */
if (val & BMCR_RESET)
break;
- ksz_pread8(dev, p, regs[P_SPEED_STATUS], &speed);
+ ret = ksz_pread8(dev, p, regs[P_SPEED_STATUS], &speed);
+ if (ret)
+ return ret;
+
data = speed;
if (val & KSZ886X_BMCR_HP_MDIX)
data |= PORT_HP_MDIX;
else
data &= ~PORT_HP_MDIX;
- if (data != speed)
- ksz_pwrite8(dev, p, regs[P_SPEED_STATUS], data);
- ksz_pread8(dev, p, regs[P_FORCE_CTRL], &ctrl);
+
+ if (data != speed) {
+ ret = ksz_pwrite8(dev, p, regs[P_SPEED_STATUS], data);
+ if (ret)
+ return ret;
+ }
+
+ ret = ksz_pread8(dev, p, regs[P_FORCE_CTRL], &ctrl);
+ if (ret)
+ return ret;
+
data = ctrl;
if (ksz_is_ksz88x3(dev)) {
if ((val & BMCR_ANENABLE))
@@ -726,9 +766,17 @@ int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
data |= PORT_FORCE_FULL_DUPLEX;
else
data &= ~PORT_FORCE_FULL_DUPLEX;
- if (data != ctrl)
- ksz_pwrite8(dev, p, regs[P_FORCE_CTRL], data);
- ksz_pread8(dev, p, regs[P_NEG_RESTART_CTRL], &restart);
+
+ if (data != ctrl) {
+ ret = ksz_pwrite8(dev, p, regs[P_FORCE_CTRL], data);
+ if (ret)
+ return ret;
+ }
+
+ ret = ksz_pread8(dev, p, regs[P_NEG_RESTART_CTRL], &restart);
+ if (ret)
+ return ret;
+
data = restart;
if (val & KSZ886X_BMCR_DISABLE_LED)
data |= PORT_LED_OFF;
@@ -758,11 +806,19 @@ int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
data |= PORT_PHY_LOOPBACK;
else
data &= ~PORT_PHY_LOOPBACK;
- if (data != restart)
- ksz_pwrite8(dev, p, regs[P_NEG_RESTART_CTRL], data);
+
+ if (data != restart) {
+ ret = ksz_pwrite8(dev, p, regs[P_NEG_RESTART_CTRL],
+ data);
+ if (ret)
+ return ret;
+ }
break;
case MII_ADVERTISE:
- ksz_pread8(dev, p, regs[P_LOCAL_CTRL], &ctrl);
+ ret = ksz_pread8(dev, p, regs[P_LOCAL_CTRL], &ctrl);
+ if (ret)
+ return ret;
+
data = ctrl;
data &= ~(PORT_AUTO_NEG_SYM_PAUSE |
PORT_AUTO_NEG_100BTX_FD |
@@ -779,8 +835,12 @@ int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
data |= PORT_AUTO_NEG_10BT_FD;
if (val & ADVERTISE_10HALF)
data |= PORT_AUTO_NEG_10BT;
- if (data != ctrl)
- ksz_pwrite8(dev, p, regs[P_LOCAL_CTRL], data);
+
+ if (data != ctrl) {
+ ret = ksz_pwrite8(dev, p, regs[P_LOCAL_CTRL], data);
+ if (ret)
+ return ret;
+ }
break;
case PHY_REG_LINK_MD:
if (val & PHY_START_CABLE_DIAG)
--
2.30.2
\
 
 \ /
  Last update: 2022-07-29 15:05    [W:0.130 / U:0.844 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site