lkml.org 
[lkml]   [2022]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v1 01/10] net: dsa: microchip: don't announce extended register support on non Gbit chips
Date
This issue was detected after adding support of regmap_ranges for KSZ8563R
chip. This chip is reporting extended registers support without having
actual extended registers. This made PHYlib request not existing
registers.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
drivers/net/dsa/microchip/ksz9477.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)

diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index c108d5444695..841f0d2b15c9 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -264,6 +264,22 @@ void ksz9477_port_init_cnt(struct ksz_device *dev, int port)
mutex_unlock(&mib->cnt_mutex);
}

+
+static void ksz9477_r_phy_quirks(struct ksz_device *dev, u16 addr, u16 reg,
+ u16 *data)
+{
+ /* KSZ8563R do not have extended registers but BMSR_ESTATEN and
+ * BMSR_ERCAP bits are set.
+ * Since all KSZ9893 compatible chips, do not support extended
+ * registers, it should be save to apply this quirk on complete family.
+ * It is not possible to integrate this code in the PHY driver, since
+ * we can't use PHYid to distinguish Gbit capable KSZ9477 PHYs from
+ * 100Mbit KSZ8563R PHYs.
+ */
+ if (dev->chip_id == KSZ9893_CHIP_ID && reg == MII_BMSR)
+ *data &= ~(BMSR_ESTATEN | BMSR_ERCAP);
+}
+
void ksz9477_r_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 *data)
{
u16 val = 0xffff;
@@ -308,6 +324,7 @@ void ksz9477_r_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 *data)
}
} else {
ksz_pread16(dev, addr, 0x100 + (reg << 1), &val);
+ ksz9477_r_phy_quirks(dev, addr, reg, &val);
}

*data = val;
--
2.30.2
\
 
 \ /
  Last update: 2022-07-29 15:05    [W:0.124 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site