lkml.org 
[lkml]   [2022]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 0/8] Add ipq806x missing bindings
On Sat, Jul 16, 2022 at 09:46:23PM -0500, Bjorn Andersson wrote:
> On Wed 06 Jul 20:09 CDT 2022, Christian Marangi wrote:
>
> > This is a respin of "Multiple addition to ipq8064 dtsi" series
> > with major changes and some commit removed.
> >
> > This series try to add some of the missing bindings for ipq806x.
> >
> > This still lacks of the cpu bindings and all the bindings required
> > to scale cpu clk or L2. These will come later as the driver and
> > documentation require some changes.
> >
> > So for now we try to add bindings that can directly applied without
> > making changes to any drivers.
> >
> > Changes:
> > v2:
> > - Dropped "add sic non secure node for ipq8064" (no user found)
> > - Dropped "add smem node for ipq8064" (require changes to the driver
> > to remove syscon node and use regs directly, will be added in a
> > different series)
> > - Dropped "fix dtc warning for missing #address-cells for ipq8064" (
> > doesn't actually fix any warning)
> > - Changed "enable usb phy by default for ipq8064" to disable usb phy
> > by default
> > - Reworked rpm smb208 declaration to a saparate dtsi
> > - Fixed order with compatible-reg-status
> > - Squashed "remove redundant binding from ipq8064 rb3011 dts" with
> > "add multiple missing pin definition for ipq8064" to prevent dtc
> > error.
> > - Add review tag for snps patch
> >
> > Changes from "Multiple addition to ipq8064 dtsi":
> > v3:
> > - Fix error in rb3011 dts
> > - Add tested-by tag on the entire series
> > v2:
> > - Added missing patch
> > - Added additional gsbi6 spi
> > - Added extra description for L2 cache opp
> > - Fxied smb208 enabled by default that is problematic for rb3011 devices
> >
> > Christian Marangi (8):
> > ARM: dts: qcom: add multiple missing pin definition for ipq8064
> > ARM: dts: qcom: add gsbi6 missing definition for ipq8064
> > ARM: dts: qcom: add specific ipq8064 dtsi with smb208 rpm regulators
> > ARM: dts: qcom: add missing snps,dwmac compatible for gmac ipq8064
> > ARM: dts: qcom: disable usb phy by default for ipq8064
> > ARM: dts: qcom: reduce pci IO size to 64K for ipq8064
> > ARM: dts: qcom: fix and add some missing gsbi node for ipq8064
> > ARM: dts: qcom: add speedbin efuse nvmem node
>
> Please prefix your ipa8064-specific patches with
> "ARM: dts: qcom: ipq8064: ..."
>
> It makes the git history easier to read, so I fixed it up while applying
> these.
>

Oh ok! I wasn't aware of this tag looking at the old commits. Will do
that in the next commits.

> >
> > arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 6 -
> > arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 9 --
> > arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi | 37 +++++
> > arch/arm/boot/dts/qcom-ipq8064.dtsi | 150 +++++++++++++++++++--
> > 4 files changed, 179 insertions(+), 23 deletions(-)
> > create mode 100644 arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi
> >
> > --
> > 2.36.1
> >

--
Ansuel

\
 
 \ /
  Last update: 2022-07-17 11:21    [W:0.114 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site