[lkml]   [2022]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 0/8] Add ipq806x missing bindings
This is a respin of "Multiple addition to ipq8064 dtsi" series
with major changes and some commit removed.

This series try to add some of the missing bindings for ipq806x.

This still lacks of the cpu bindings and all the bindings required
to scale cpu clk or L2. These will come later as the driver and
documentation require some changes.

So for now we try to add bindings that can directly applied without
making changes to any drivers.

- Dropped "add sic non secure node for ipq8064" (no user found)
- Dropped "add smem node for ipq8064" (require changes to the driver
to remove syscon node and use regs directly, will be added in a
different series)
- Dropped "fix dtc warning for missing #address-cells for ipq8064" (
doesn't actually fix any warning)
- Changed "enable usb phy by default for ipq8064" to disable usb phy
by default
- Reworked rpm smb208 declaration to a saparate dtsi
- Fixed order with compatible-reg-status
- Squashed "remove redundant binding from ipq8064 rb3011 dts" with
"add multiple missing pin definition for ipq8064" to prevent dtc
- Add review tag for snps patch

Changes from "Multiple addition to ipq8064 dtsi":
- Fix error in rb3011 dts
- Add tested-by tag on the entire series
- Added missing patch
- Added additional gsbi6 spi
- Added extra description for L2 cache opp
- Fxied smb208 enabled by default that is problematic for rb3011 devices

Christian Marangi (8):
ARM: dts: qcom: add multiple missing pin definition for ipq8064
ARM: dts: qcom: add gsbi6 missing definition for ipq8064
ARM: dts: qcom: add specific ipq8064 dtsi with smb208 rpm regulators
ARM: dts: qcom: add missing snps,dwmac compatible for gmac ipq8064
ARM: dts: qcom: disable usb phy by default for ipq8064
ARM: dts: qcom: reduce pci IO size to 64K for ipq8064
ARM: dts: qcom: fix and add some missing gsbi node for ipq8064
ARM: dts: qcom: add speedbin efuse nvmem node

arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 6 -
arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 9 --
arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi | 37 +++++
arch/arm/boot/dts/qcom-ipq8064.dtsi | 150 +++++++++++++++++++--
4 files changed, 179 insertions(+), 23 deletions(-)
create mode 100644 arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi


 \ /
  Last update: 2022-07-07 03:11    [W:0.081 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site