[lkml]   [2022]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH 0/3] arm64: dts: qcom: sdm845-db845: Some i2c fixes
On my db845c (perhaps old firmware?) i2c14 is using GPI, so this enables that.
And while I'm touching it I added dma properties to all the geni i2c and spi
nodes and specified a default clock to avoid two warnings in the log during

Bjorn Andersson (3):
arm64: dts: qcom: sdm845: Fill in GENI DMA references
arm64: dts: qcom: sdm845-db845c: Enable gpi_dma1
arm64: dts: qcom: sdm845-db845c: Specify a i2c bus clocks

arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 6 ++
arch/arm64/boot/dts/qcom/sdm845.dtsi | 90 ++++++++++++++++++++++
2 files changed, 96 insertions(+)


 \ /
  Last update: 2022-07-17 05:42    [W:0.064 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site