lkml.org 
[lkml]   [2022]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 0/3] arm64: dts: qcom: sdm845-db845: Some i2c fixes
Date
On Sat, 16 Jul 2022 20:44:00 -0700, Bjorn Andersson wrote:
> On my db845c (perhaps old firmware?) i2c14 is using GPI, so this enables that.
> And while I'm touching it I added dma properties to all the geni i2c and spi
> nodes and specified a default clock to avoid two warnings in the log during
> boot.
>
> Bjorn Andersson (3):
> arm64: dts: qcom: sdm845: Fill in GENI DMA references
> arm64: dts: qcom: sdm845-db845c: Enable gpi_dma1
> arm64: dts: qcom: sdm845-db845c: Specify a i2c bus clocks
>
> [...]

Applied, thanks!

[1/3] arm64: dts: qcom: sdm845: Fill in GENI DMA references
commit: 0f064ae7cf703b0527de3a0608ef88548fdb5d9d
[2/3] arm64: dts: qcom: sdm845-db845c: Enable gpi_dma1
commit: 79cfb1124af9b55e082d9d3efbefa4d3fc8b3cdc
[3/3] arm64: dts: qcom: sdm845-db845c: Specify a i2c bus clocks
commit: 746ff2bfcec78cfd522b2a490e7207c3fe836634

Best regards,
--
Bjorn Andersson <bjorn.andersson@linaro.org>

\
 
 \ /
  Last update: 2022-07-19 06:49    [W:0.082 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site