Messages in this thread | | | Date | Wed, 13 Jul 2022 17:24:43 +0100 | From | Jonathan Cameron <> | Subject | Re: [PATCH v2 4/5] dt-bindings: iio: adc: stmpe: Remove node name requirement |
| |
On Tue, 12 Jul 2022 18:33:44 +0200 Francesco Dolcini <francesco.dolcini@toradex.com> wrote:
> STMPE driver does not require a specific node name anymore, only the > compatible is checked, update binding according to this. > > Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> I'm assuming this will go through mfd (or at least some tree that isn't IIO :) Shout if I should pick this up in the IIO tree.
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> --- > Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml | 3 +-- > 1 file changed, 1 insertion(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml > index 9049c699152f..333744a2159c 100644 > --- a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml > @@ -13,8 +13,7 @@ description: > This ADC forms part of an ST microelectronics STMPE multifunction device . > The ADC is shared with the STMPE touchscreen. As a result some ADC related > settings are specified in the parent node. > - The node name myst be stmpe_adc and should be a child node of the stmpe node > - to which it belongs. > + The node should be a child node of the stmpe node to which it belongs. > > properties: > compatible:
| |