lkml.org 
[lkml]   [2022]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 3/5] dt-bindings: gpio: stmpe: Remove node name requirement
Hello Bartosz, can you pick this? Patches 1 and 2 were applied to MFD
tree.

On Tue, Jul 12, 2022 at 06:33:43PM +0200, Francesco Dolcini wrote:
> STMPE driver does not require a specific node name anymore, only the
> compatible is checked, update binding according to this.
>
> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
> ---
> Documentation/devicetree/bindings/gpio/gpio-stmpe.txt | 3 +--
> 1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt b/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
> index a0e4cf885213..b33f8f02c0d7 100644
> --- a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
> +++ b/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
> @@ -8,8 +8,7 @@ Optional properties:
> - st,norequest-mask: bitmask specifying which GPIOs should _not_ be requestable
> due to different usage (e.g. touch, keypad)
>
> -Node name must be stmpe_gpio and should be child node of stmpe node to which it
> -belongs.
> +Node should be child node of stmpe node to which it belongs.
>
> Example:
> stmpe_gpio {
> --
> 2.25.1
>

\
 
 \ /
  Last update: 2022-08-09 15:49    [W:0.218 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site