lkml.org 
[lkml]   [2022]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v1 25/33] ata/drivers/ahci_imx: Switch to new of thermal API
From
On 7/11/22 06:24, Daniel Lezcano wrote:
> The thermal OF code has a new API allowing to migrate the OF
> initialization to a simpler approach.
>
> Use this new API.
>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org>
> ---
> drivers/ata/ahci_imx.c | 15 ++++++++++-----
> 1 file changed, 10 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c
> index 79aa9f285312..5ad9a890e71a 100644
> --- a/drivers/ata/ahci_imx.c
> +++ b/drivers/ata/ahci_imx.c
> @@ -327,7 +327,7 @@ static int read_adc_sum(void *dev, u16 rtune_ctl_reg, void __iomem * mmio)
> }
>
> /* SATA AHCI temperature monitor */
> -static int sata_ahci_read_temperature(void *dev, int *temp)
> +static int __sata_ahci_read_temperature(void *dev, int *temp)
> {
> u16 mpll_test_reg, rtune_ctl_reg, dac_ctl_reg, read_sum;
> u32 str1, str2, str3, str4;
> @@ -416,6 +416,11 @@ static int sata_ahci_read_temperature(void *dev, int *temp)
> return 0;
> }
>
> +static int sata_ahci_read_temperature(struct thermal_zone_device *tz, int *temp)
> +{
> + return __sata_ahci_read_temperature(tz->devdata, temp);
> +}
> +
> static ssize_t sata_ahci_show_temp(struct device *dev,
> struct device_attribute *da,
> char *buf)
> @@ -423,14 +428,14 @@ static ssize_t sata_ahci_show_temp(struct device *dev,
> unsigned int temp = 0;
> int err;
>
> - err = sata_ahci_read_temperature(dev, &temp);
> + err = __sata_ahci_read_temperature(dev, &temp);
> if (err < 0)
> return err;
>
> return sprintf(buf, "%u\n", temp);
> }

I do not see why the above changes are necessary. Please explain.

>
> -static const struct thermal_zone_of_device_ops fsl_sata_ahci_of_thermal_ops = {
> +static struct thermal_zone_device_ops fsl_sata_ahci_of_thermal_ops = {

Why remove the const ?

> .get_temp = sata_ahci_read_temperature,
> };
>
> @@ -1131,8 +1136,8 @@ static int imx_ahci_probe(struct platform_device *pdev)
> ret = PTR_ERR(hwmon_dev);
> goto disable_clk;
> }
> - devm_thermal_zone_of_sensor_register(hwmon_dev, 0, hwmon_dev,
> - &fsl_sata_ahci_of_thermal_ops);
> + devm_thermal_of_zone_register(hwmon_dev, 0, hwmon_dev,
> + &fsl_sata_ahci_of_thermal_ops);

This is the only change that seems necessary.

> dev_info(dev, "%s: sensor 'sata_ahci'\n", dev_name(hwmon_dev));
> }
>

And it is hard to review a patch without the full series for context.
Please send all patches next time.


--
Damien Le Moal
Western Digital Research

\
 
 \ /
  Last update: 2022-07-11 01:20    [W:0.282 / U:1.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site