lkml.org 
[lkml]   [2022]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 5/5] OPP: Remove custom OPP helper support
From
31.05.2022 13:10, Viresh Kumar пишет:
> The only user of the custom helper is migrated to use
> config_regulators() interface. Remove the now unused custom OPP helper
> support.
>
> This cleans up _set_opp() and leaves a single code path to be used by
> all users.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
> drivers/opp/core.c | 126 +----------------------------------------
> drivers/opp/opp.h | 7 ---
> include/linux/pm_opp.h | 35 ------------
> 3 files changed, 2 insertions(+), 166 deletions(-)
>
> diff --git a/drivers/opp/core.c b/drivers/opp/core.c
> index 58ce1240e808..554a043bc225 100644
> --- a/drivers/opp/core.c
> +++ b/drivers/opp/core.c
> @@ -972,36 +972,6 @@ static int _set_opp_bw(const struct opp_table *opp_table,
> return 0;
> }
>
> -static int _set_opp_custom(const struct opp_table *opp_table,
> - struct device *dev, struct dev_pm_opp *opp,
> - unsigned long freq)
> -{
> - struct dev_pm_set_opp_data *data = opp_table->set_opp_data;
> - struct dev_pm_opp *old_opp = opp_table->current_opp;
> - int size;
> -
> - /*
> - * We support this only if dev_pm_opp_set_config() was called
> - * earlier to set regulators.
> - */
> - if (opp_table->sod_supplies) {
> - size = sizeof(*old_opp->supplies) * opp_table->regulator_count;
> - memcpy(data->old_opp.supplies, old_opp->supplies, size);
> - memcpy(data->new_opp.supplies, opp->supplies, size);
> - data->regulator_count = opp_table->regulator_count;
> - } else {
> - data->regulator_count = 0;
> - }
> -
> - data->regulators = opp_table->regulators;
> - data->clk = opp_table->clk;
> - data->dev = dev;
> - data->old_opp.rate = old_opp->rate;
> - data->new_opp.rate = freq;
> -
> - return opp_table->set_opp(data);
> -}
> -
> static int _set_required_opp(struct device *dev, struct device *pd_dev,
> struct dev_pm_opp *opp, int i)
> {
> @@ -1186,13 +1156,7 @@ static int _set_opp(struct device *dev, struct opp_table *opp_table,
> }
> }
>
> - if (opp_table->set_opp) {
> - ret = _set_opp_custom(opp_table, dev, opp, freq);
> - } else {
> - /* Only frequency scaling */
> - ret = _generic_set_opp_clk_only(dev, opp_table->clk, freq);
> - }
> -
> + ret = _generic_set_opp_clk_only(dev, opp_table->clk, freq);
> if (ret)
> return ret;
>
> @@ -2054,7 +2018,6 @@ static void _opp_put_prop_name(struct opp_table *opp_table)
> static int _opp_set_regulators(struct opp_table *opp_table, struct device *dev,
> const char * const names[], unsigned int count)
> {
> - struct dev_pm_opp_supply *supplies;
> struct regulator *reg;
> int ret, i;
>
> @@ -2082,20 +2045,8 @@ static int _opp_set_regulators(struct opp_table *opp_table, struct device *dev,
>
> opp_table->regulator_count = count;
>
> - supplies = kmalloc_array(count * 2, sizeof(*supplies), GFP_KERNEL);
> - if (!supplies) {
> - ret = -ENOMEM;
> - goto free_regulators;
> - }
> -
> - mutex_lock(&opp_table->lock);
> - opp_table->sod_supplies = supplies;
> - if (opp_table->set_opp_data) {
> - opp_table->set_opp_data->old_opp.supplies = supplies;
> - opp_table->set_opp_data->new_opp.supplies = supplies + count;
> - }
> -
> /* Set generic config_regulators() for single regulators here */
> + mutex_lock(&opp_table->lock);
> if (count == 1)
> opp_table->config_regulators = _opp_config_regulator_single;
> mutex_unlock(&opp_table->lock);
> @@ -2132,16 +2083,6 @@ static void _opp_put_regulators(struct opp_table *opp_table)
> for (i = opp_table->regulator_count - 1; i >= 0; i--)
> regulator_put(opp_table->regulators[i]);
>
> - mutex_lock(&opp_table->lock);
> - if (opp_table->set_opp_data) {
> - opp_table->set_opp_data->old_opp.supplies = NULL;
> - opp_table->set_opp_data->new_opp.supplies = NULL;
> - }
> -
> - kfree(opp_table->sod_supplies);
> - opp_table->sod_supplies = NULL;
> - mutex_unlock(&opp_table->lock);
> -
> kfree(opp_table->regulators);
> opp_table->regulators = NULL;
> opp_table->regulator_count = -1;
> @@ -2195,61 +2136,6 @@ static void _opp_put_clkname(struct opp_table *opp_table)
> }
> }
>
> -/**
> - * _opp_register_set_opp_helper() - Register custom set OPP helper
> - * @dev: Device for which the helper is getting registered.
> - * @set_opp: Custom set OPP helper.
> - *
> - * This is useful to support complex platforms (like platforms with multiple
> - * regulators per device), instead of the generic OPP set rate helper.
> - *
> - * This must be called before any OPPs are initialized for the device.
> - */
> -static int _opp_register_set_opp_helper(struct opp_table *opp_table,
> - struct device *dev, int (*set_opp)(struct dev_pm_set_opp_data *data))
> -{
> - struct dev_pm_set_opp_data *data;
> -
> - /* Another CPU that shares the OPP table has set the helper ? */
> - if (opp_table->set_opp)
> - return 0;
> -
> - data = kzalloc(sizeof(*data), GFP_KERNEL);
> - if (!data)
> - return -ENOMEM;
> -
> - mutex_lock(&opp_table->lock);
> - opp_table->set_opp_data = data;
> - if (opp_table->sod_supplies) {
> - data->old_opp.supplies = opp_table->sod_supplies;
> - data->new_opp.supplies = opp_table->sod_supplies +
> - opp_table->regulator_count;
> - }
> - mutex_unlock(&opp_table->lock);
> -
> - opp_table->set_opp = set_opp;
> -
> - return 0;
> -}
> -
> -/**
> - * _opp_unregister_set_opp_helper() - Releases resources blocked for set_opp helper
> - * @opp_table: OPP table returned from _opp_register_set_opp_helper().
> - *
> - * Release resources blocked for platform specific set_opp helper.
> - */
> -static void _opp_unregister_set_opp_helper(struct opp_table *opp_table)
> -{
> - if (opp_table->set_opp) {
> - opp_table->set_opp = NULL;
> -
> - mutex_lock(&opp_table->lock);
> - kfree(opp_table->set_opp_data);
> - opp_table->set_opp_data = NULL;
> - mutex_unlock(&opp_table->lock);
> - }
> -}
> -
> /**
> * _opp_set_config_regulators_helper() - Register custom set regulator helper.
> * @dev: Device for which the helper is getting registered.
> @@ -2447,13 +2333,6 @@ struct opp_table *dev_pm_opp_set_config(struct device *dev,
> goto err;
> }
>
> - /* Configure opp helper */
> - if (config->set_opp) {
> - ret = _opp_register_set_opp_helper(opp_table, dev, config->set_opp);
> - if (ret)
> - goto err;
> - }
> -
> /* Configure config_regulators helper */
> if (config->config_regulators) {
> ret = _opp_set_config_regulators_helper(opp_table, dev, config->config_regulators);
> @@ -2516,7 +2395,6 @@ void dev_pm_opp_clear_config(struct opp_table *opp_table)
> _opp_put_regulators(opp_table);
> _opp_put_supported_hw(opp_table);
> _opp_put_config_regulators_helper(opp_table);
> - _opp_unregister_set_opp_helper(opp_table);
> _opp_put_prop_name(opp_table);
> _opp_put_clkname(opp_table);
>
> diff --git a/drivers/opp/opp.h b/drivers/opp/opp.h
> index 4695d315e7f9..407eee9f10ab 100644
> --- a/drivers/opp/opp.h
> +++ b/drivers/opp/opp.h
> @@ -161,9 +161,6 @@ enum opp_table_access {
> * @enabled: Set to true if the device's resources are enabled/configured.
> * @genpd_performance_state: Device's power domain support performance state.
> * @is_genpd: Marks if the OPP table belongs to a genpd.
> - * @set_opp: Platform specific set_opp callback
> - * @sod_supplies: Set opp data supplies
> - * @set_opp_data: Data to be passed to set_opp callback
> * @dentry: debugfs dentry pointer of the real device directory (not links).
> * @dentry_name: Name of the real dentry.
> *
> @@ -213,10 +210,6 @@ struct opp_table {
> bool genpd_performance_state;
> bool is_genpd;
>
> - int (*set_opp)(struct dev_pm_set_opp_data *data);
> - struct dev_pm_opp_supply *sod_supplies;
> - struct dev_pm_set_opp_data *set_opp_data;
> -
> #ifdef CONFIG_DEBUG_FS
> struct dentry *dentry;
> char dentry_name[NAME_MAX];
> diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
> index 185503aab64d..c6d8f01ef9fd 100644
> --- a/include/linux/pm_opp.h
> +++ b/include/linux/pm_opp.h
> @@ -57,39 +57,6 @@ struct dev_pm_opp_icc_bw {
> u32 peak;
> };
>
> -/**
> - * struct dev_pm_opp_info - OPP freq/voltage/current values
> - * @rate: Target clk rate in hz
> - * @supplies: Array of voltage/current values for all power supplies
> - *
> - * This structure stores the freq/voltage/current values for a single OPP.
> - */
> -struct dev_pm_opp_info {
> - unsigned long rate;
> - struct dev_pm_opp_supply *supplies;
> -};
> -
> -/**
> - * struct dev_pm_set_opp_data - Set OPP data
> - * @old_opp: Old OPP info
> - * @new_opp: New OPP info
> - * @regulators: Array of regulator pointers
> - * @regulator_count: Number of regulators
> - * @clk: Pointer to clk
> - * @dev: Pointer to the struct device
> - *
> - * This structure contains all information required for setting an OPP.
> - */
> -struct dev_pm_set_opp_data {
> - struct dev_pm_opp_info old_opp;
> - struct dev_pm_opp_info new_opp;
> -
> - struct regulator **regulators;
> - unsigned int regulator_count;
> - struct clk *clk;
> - struct device *dev;
> -};
> -
> typedef int (*config_regulators_t)(struct device *dev, struct dev_pm_opp *old_opp,
> struct dev_pm_opp *new_opp, struct regulator **regulators,
> unsigned int count);
> @@ -97,7 +64,6 @@ typedef int (*config_regulators_t)(struct device *dev, struct dev_pm_opp *old_op
> * struct dev_pm_opp_config - Device OPP configuration values
> * @clk_name: Clk name.
> * @prop_name: Name to postfix to properties.
> - * @set_opp: Custom set OPP helper.
> * @config_regulators: Custom set regulator helper.
> * @supported_hw: Array of hierarchy of versions to match.
> * @supported_hw_count: Number of elements in the array.
> @@ -111,7 +77,6 @@ typedef int (*config_regulators_t)(struct device *dev, struct dev_pm_opp *old_op
> struct dev_pm_opp_config {
> const char *clk_name;
> const char *prop_name;
> - int (*set_opp)(struct dev_pm_set_opp_data *data);
> config_regulators_t config_regulators;
> unsigned int *supported_hw;
> unsigned int supported_hw_count;

Hello Viresh,

Unfortunately we can't remove the set_opp_helper(). It's terrible that
this function is unused by Tegra 3d driver because it should be used.

The patch that supposed to use the devm_pm_opp_register_set_opp_helper()
[1] was merged a half year ago and just today I noticed that the merged
code doesn't have devm_pm_opp_register_set_opp_helper() [2]. I think
Thierry edited my patch before applying it, perhaps there was a merge
conflict :/ This needs to be fixed now.

[1] https://lore.kernel.org/all/20210817012754.8710-16-digetx@gmail.com/

[2]
https://elixir.bootlin.com/linux/v5.19-rc3/source/drivers/gpu/drm/tegra/gr3d.c#L535

\
 
 \ /
  Last update: 2022-06-25 13:43    [W:5.693 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site