lkml.org 
[lkml]   [2022]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 00/14] arm64: dts: imx8mp: correct pad settings
From
On 22/06/2022 08.13, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> i.MX8MP iomux pad BIT3 and BIT0 are reserved bits. Writing 1 to the
> reserved bit will be ignored and reading will still return 0. Although
> function not broken with reserved bits set, we should not set reserved
> bits.

Thank you, these have really been bugging my while trying to bring up an
imx8mp-based board and adding the right pinmux settings - not knowing
whether there was some undocumented effect from including one of those
bits has led me astray more than once.

One question: E.g. in patch 11, you change the setting from 0x49 to
0x40, which is of course exactly what the patch description says. But
when bit 8 (PE) is not set, is there any effect from either setting of
bit 6 (PUE)? Not that I suggest changing to 0x00, but I'm just curious.

For the series:

Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>

\
 
 \ /
  Last update: 2022-06-22 08:33    [W:0.728 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site