lkml.org 
[lkml]   [2022]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] usb: dwc3: core: Enable GUCTL1 bit 10 for fixing crc error after resume bug
On Mon, Jun 13, 2022 at 06:17:03PM +0530, Piyush Mehta wrote:
> When configured in HOST mode, after issuing U3/L2 exit controller fails
> to send proper CRC checksum in CRC5 field. Because of this behavior
> Transaction Error is generated, resulting in reset and re-enumeration of
> usb device attached. Enabling chicken bit 10 of GUCTL1 will correct this
> problem.
>
> When this bit is set to '1', the UTMI/ULPI opmode will be changed to
> "normal" along with HS terminations after EOR. This option is to support
> certain legacy UTMI/ULPI PHYs.
>
> Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com>
> ---
> drivers/usb/dwc3/core.c | 16 ++++++++++++++++
> drivers/usb/dwc3/core.h | 6 ++++++
> 2 files changed, 22 insertions(+)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index e027c0420dc3..8afc025390d2 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -1140,6 +1140,20 @@ static int dwc3_core_init(struct dwc3 *dwc)
> dwc3_writel(dwc->regs, DWC3_GUCTL2, reg);
> }
>
> + /*
> + * When configured in HOST mode, after issuing U3/L2 exit controller
> + * fails to send proper CRC checksum in CRC5 feild. Because of this
> + * behaviour Transaction Error is generated, resulting in reset and
> + * re-enumeration of usb device attached. Enabling bit 10 of GUCTL1
> + * will correct this problem. This option is to support certain
> + * legacy ULPI PHYs.
> + */
> + if (dwc->enable_guctl1_resume_quirk) {

What's the downside to just always doing this?

> + reg = dwc3_readl(dwc->regs, DWC3_GUCTL1);
> + reg |= DWC3_GUCTL1_RESUME_QUIRK;
> + dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
> + }
> +
> if (!DWC3_VER_IS_PRIOR(DWC3, 250A)) {
> reg = dwc3_readl(dwc->regs, DWC3_GUCTL1);
>
> @@ -1483,6 +1497,8 @@ static void dwc3_get_properties(struct dwc3 *dwc)
> "snps,dis-del-phy-power-chg-quirk");
> dwc->dis_tx_ipgap_linecheck_quirk = device_property_read_bool(dev,
> "snps,dis-tx-ipgap-linecheck-quirk");
> + dwc->enable_guctl1_resume_quirk = device_property_read_bool(dev,
> + "snps,enable_guctl1_resume_quirk");
> dwc->parkmode_disable_ss_quirk = device_property_read_bool(dev,
> "snps,parkmode-disable-ss-quirk");
>
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index 81c486b3941c..e386209f0e1b 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -397,6 +397,9 @@
> #define DWC3_GUCTL_REFCLKPER_MASK 0xffc00000
> #define DWC3_GUCTL_REFCLKPER_SEL 22
>
> +/* Global User Control Register 1 */
> +#define DWC3_GUCTL1_RESUME_QUIRK BIT(10)
> +
> /* Global User Control Register 2 */
> #define DWC3_GUCTL2_RST_ACTBITLATER BIT(14)
>
> @@ -1093,6 +1096,8 @@ struct dwc3_scratchpad_array {
> * change quirk.
> * @dis_tx_ipgap_linecheck_quirk: set if we disable u2mac linestate
> * check during HS transmit.
> + * @enable_guctl1_resume_quirk: Set if we enable quirk for fixing improper crc
> + * generation after resume from suspend.
> * @parkmode_disable_ss_quirk: set if we need to disable all SuperSpeed
> * instances in park mode.
> * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
> @@ -1308,6 +1313,7 @@ struct dwc3 {
> unsigned dis_u2_freeclk_exists_quirk:1;
> unsigned dis_del_phy_power_chg_quirk:1;
> unsigned dis_tx_ipgap_linecheck_quirk:1;
> + unsigned enable_guctl1_resume_quirk:1;
> unsigned parkmode_disable_ss_quirk:1;
>
> unsigned tx_de_emphasis_quirk:1;
> --
> 2.17.1
>
>

\
 
 \ /
  Last update: 2022-06-18 00:48    [W:0.070 / U:0.936 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site