lkml.org 
[lkml]   [2022]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V1 2/5] iio: accel: bmi088: Add support for bmi085 accel.
Date
Add supports for BMI085, an Inertial Measurement Unit,
with an accelerometer and gyroscope.
The commit adds the accelerometer driver for the SPI interface.
The gyroscope part is already supported by the BMG160 driver.
Different from BMI088, the BMI085 accelerometer has the range of
+/-2, 4, 6, and 8g.

Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
---
drivers/iio/accel/bmi088-accel-core.c | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/drivers/iio/accel/bmi088-accel-core.c b/drivers/iio/accel/bmi088-accel-core.c
index 0c58ffdd00e3..ac8acf6e2ff0 100644
--- a/drivers/iio/accel/bmi088-accel-core.c
+++ b/drivers/iio/accel/bmi088-accel-core.c
@@ -435,6 +435,13 @@ static const struct bmi088_accel_chip_info bmi088_accel_chip_info_tbl[] = {
.num_channels = ARRAY_SIZE(bmi088_accel_channels),
.scale_table = {{0, 897}, {0, 1795}, {0, 3590}, {0, 7179}},
},
+ [1] = {
+ .name = "bmi085-accel",
+ .chip_id = 0x1F,
+ .channels = bmi088_accel_channels,
+ .num_channels = ARRAY_SIZE(bmi088_accel_channels),
+ .scale_table = {{0, 598}, {0, 1196}, {0, 2393}, {0, 4785}},
+ },
};

static const struct iio_info bmi088_accel_info = {
--
2.25.1
\
 
 \ /
  Last update: 2022-05-09 15:49    [W:0.095 / U:0.864 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site