lkml.org 
[lkml]   [2022]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V1 3/5] iio: accel: bmi088: Add support for bmi090l accel
Date
Add supports for BMI090L, it's a high-performance Inertial
Measurement Unit, with an accelerometer and gyroscope.
The commit adds the accelerometer driver for the SPI interface.
The gyroscope part is already supported by the BMG160 driver.
Same as BMI088, BMI090L have the range of +/-3, 6, 12, and 24g.

Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
---
drivers/iio/accel/bmi088-accel-core.c | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/drivers/iio/accel/bmi088-accel-core.c b/drivers/iio/accel/bmi088-accel-core.c
index ac8acf6e2ff0..44cbe098c093 100644
--- a/drivers/iio/accel/bmi088-accel-core.c
+++ b/drivers/iio/accel/bmi088-accel-core.c
@@ -442,6 +442,13 @@ static const struct bmi088_accel_chip_info bmi088_accel_chip_info_tbl[] = {
.num_channels = ARRAY_SIZE(bmi088_accel_channels),
.scale_table = {{0, 598}, {0, 1196}, {0, 2393}, {0, 4785}},
},
+ [2] = {
+ .name = "bmi090l-accel",
+ .chip_id = 0x1A,
+ .channels = bmi088_accel_channels,
+ .num_channels = ARRAY_SIZE(bmi088_accel_channels),
+ .scale_table = {{0, 897}, {0, 1795}, {0, 3590}, {0, 7179}},
+ },
};

static const struct iio_info bmi088_accel_info = {
--
2.25.1
\
 
 \ /
  Last update: 2022-05-09 15:49    [W:0.122 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site