Messages in this thread | | | From | Hakan Jansson <> | Subject | [PATCH v3 0/2] Bluetooth: hci_bcm: Autobaud mode support | Date | Mon, 30 May 2022 17:02:16 +0200 |
| |
Some devices (e.g. CYW5557x) require autobaud mode to enable FW loading. Autobaud mode can also be required on some boards where the controller device is using a non-standard baud rate when first powered on.
Only a limited subset of HCI commands are supported in autobaud mode.
These patches add a DT property, "brcm,requires-autobaud-mode", to control autobaud mode selection.
Changes v2 -> v3: - Rename DT property and modify description in binding document
Changes v1 -> v2: - Modify description in binding document
Hakan Jansson (2): dt-bindings: net: broadcom-bluetooth: Add property for autobaud mode Bluetooth: hci_bcm: Add support for FW loading in autobaud mode
.../bindings/net/broadcom-bluetooth.yaml | 7 +++++ drivers/bluetooth/btbcm.c | 31 ++++++++++++++----- drivers/bluetooth/btbcm.h | 8 ++--- drivers/bluetooth/hci_bcm.c | 16 ++++++++-- 4 files changed, 47 insertions(+), 15 deletions(-)
base-commit: 677fb7525331375ba2f90f4bc94a80b9b6e697a3 -- 2.25.1
| |