lkml.org 
[lkml]   [2022]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 0/2] Bluetooth: hci_bcm: Autobaud mode support
From
Date
Hello:

This series was applied to bluetooth/bluetooth-next.git (master)
by Marcel Holtmann <marcel@holtmann.org>:

On Mon, 30 May 2022 17:02:16 +0200 you wrote:
> Some devices (e.g. CYW5557x) require autobaud mode to enable FW loading.
> Autobaud mode can also be required on some boards where the controller
> device is using a non-standard baud rate when first powered on.
>
> Only a limited subset of HCI commands are supported in autobaud mode.
>
> These patches add a DT property, "brcm,requires-autobaud-mode", to control
> autobaud mode selection.
>
> [...]

Here is the summary with links:
- [v3,1/2] dt-bindings: net: broadcom-bluetooth: Add property for autobaud mode
https://git.kernel.org/bluetooth/bluetooth-next/c/6d912cc3c21f
- [v3,2/2] Bluetooth: hci_bcm: Add support for FW loading in autobaud mode
https://git.kernel.org/bluetooth/bluetooth-next/c/3f125894bed7

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html


\
 
 \ /
  Last update: 2022-06-02 17:51    [W:0.218 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site