lkml.org 
[lkml]   [2022]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 24/31] serial: qcom: Migrate to dev_pm_opp_set_config()
Date
The OPP core now provides a unified API for setting all configuration
types, i.e. dev_pm_opp_set_config().

Lets start using it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
drivers/tty/serial/qcom_geni_serial.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 1543a6028856..391fcc3a0f61 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -1331,6 +1331,9 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
int irq;
bool console = false;
struct uart_driver *drv;
+ struct dev_pm_opp_config config = {
+ .clk_name = "se",
+ };

if (of_device_is_compatible(pdev->dev.of_node, "qcom,geni-debug-uart"))
console = true;
@@ -1414,7 +1417,7 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
if (of_property_read_bool(pdev->dev.of_node, "cts-rts-swap"))
port->cts_rts_swap = true;

- ret = devm_pm_opp_set_clkname(&pdev->dev, "se");
+ ret = devm_pm_opp_set_config(&pdev->dev, &config);
if (ret)
return ret;
/* OPP table is optional */
--
2.31.1.272.g89b43f80a514
\
 
 \ /
  Last update: 2022-05-26 13:46    [W:1.056 / U:1.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site