lkml.org 
[lkml]   [2022]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 33/40] hwmon: (lm90) Add support for ON Semiconductor NCT214 and NCT72
Date
NCT214 and NCT72 are compatible to ADT7461/ADT7461A but have full
PEC (packet error checking) support. PEC support is undocumented.

Both chips support the undocumented secondary chip and manufacturer
ID registers at 0x3e and 0x3f, and return 0x61 as chip ID. Use this
information to improve the accuracy of chip detection code.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
Documentation/hwmon/lm90.rst | 20 ++++++++++++++++++++
drivers/hwmon/Kconfig | 3 ++-
drivers/hwmon/lm90.c | 35 ++++++++++++++++++++++++++++++++++-
3 files changed, 56 insertions(+), 2 deletions(-)

diff --git a/Documentation/hwmon/lm90.rst b/Documentation/hwmon/lm90.rst
index e9a8c11eba8b..d3836d1f1275 100644
--- a/Documentation/hwmon/lm90.rst
+++ b/Documentation/hwmon/lm90.rst
@@ -147,6 +147,26 @@ Supported chips:

https://www.onsemi.com/PowerSolutions/product.do?id=NCT210

+ * ON Semiconductor NCT214
+
+ Prefix: 'nct214'
+
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+
+ Datasheet: Publicly available at the ON Semiconductor website
+
+ https://www.onsemi.com/PowerSolutions/product.do?id=NCT214
+
+ * ON Semiconductor NCT72
+
+ Prefix: 'nct72'
+
+ Addresses scanned: I2C 0x4c - 0x4d
+
+ Datasheet: Publicly available at the ON Semiconductor website
+
+ https://www.onsemi.com/PowerSolutions/product.do?id=NCT72
+
* Maxim MAX1617

Prefix: 'max1617'
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index d30ea2fea3e2..9353d207f254 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1365,7 +1365,8 @@ config SENSORS_LM90
Maxim MAX1617, MAX6642, MAX6646, MAX6647, MAX6648, MAX6649, MAX6654,
MAX6657, MAX6658, MAX6659, MAX6680, MAX6681, MAX6692, MAX6695,
MAX6696,
- ON Semiconductor NCT1008, NCT210, Winbond/Nuvoton W83L771W/G/AWG/ASG,
+ ON Semiconductor NCT1008, NCT210, NCT72, NCT214,
+ Winbond/Nuvoton W83L771W/G/AWG/ASG,
Philips SA56004, GMT G781, Texas Instruments TMP451 and TMP461
sensor chips.

diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 4ae8027722e0..2a1630b85967 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -69,6 +69,9 @@
* / ON Semiconductor. The chips are similar to ADT7461 but support two external
* temperature sensors.
*
+ * This driver also supports NCT72 and NCT214 from ON Semiconductor. The chips
+ * are similar to ADT7461/ADT7461A but have full PEC support (undocumented).
+ *
* This driver also supports the SA56004 from Philips. This device is
* pin-compatible with the LM86, the ED/EDP parts are also address-compatible.
*
@@ -125,7 +128,7 @@ static const unsigned short normal_i2c[] = {
enum chips { adm1023, adm1032, adt7461, adt7461a, adt7481,
g781, lm84, lm90, lm99,
max1617, max6642, max6646, max6648, max6654, max6657, max6659, max6680, max6696,
- nct210, sa56004, tmp451, tmp461, w83l771,
+ nct210, nct72, sa56004, tmp451, tmp461, w83l771,
};

/*
@@ -258,6 +261,8 @@ static const struct i2c_device_id lm90_id[] = {
{ "mc1066", max1617 },
{ "nct1008", adt7461a },
{ "nct210", nct210 },
+ { "nct214", nct72 },
+ { "nct72", nct72 },
{ "w83l771", w83l771 },
{ "sa56004", sa56004 },
{ "thmc10", max1617 },
@@ -348,6 +353,14 @@ static const struct of_device_id __maybe_unused lm90_of_match[] = {
.compatible = "onnn,nct1008",
.data = (void *)adt7461a
},
+ {
+ .compatible = "onnn,nct214",
+ .data = (void *)nct72
+ },
+ {
+ .compatible = "onnn,nct72",
+ .data = (void *)nct72
+ },
{
.compatible = "winbond,w83l771",
.data = (void *)w83l771
@@ -534,6 +547,15 @@ static const struct lm90_params lm90_params[] = {
.reg_status2 = MAX6696_REG_STATUS2,
.reg_local_ext = MAX6657_REG_LOCAL_TEMPL,
},
+ [nct72] = {
+ .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
+ | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP
+ | LM90_HAVE_CRIT | LM90_HAVE_PEC | LM90_HAVE_UNSIGNED_TEMP
+ | LM90_HAVE_LOW | LM90_HAVE_CONVRATE | LM90_HAVE_REMOTE_EXT,
+ .alert_alarms = 0x7c,
+ .max_convrate = 10,
+ .resolution = 10,
+ },
[nct210] = {
.flags = LM90_HAVE_ALARMS | LM90_HAVE_BROKEN_ALERT
| LM90_HAVE_REM_LIMIT_EXT | LM90_HAVE_LOW | LM90_HAVE_CONVRATE
@@ -1816,12 +1838,23 @@ static const char *lm90_detect_analog(struct i2c_client *client, bool common_add
convrate <= 0x0a)
name = "nct1008";
break;
+ case 0x55: /* NCT72 */
+ if (man_id2 == 0x41 && chip_id2 == 0x61 &&
+ (address == 0x4c || address == 0x4d) && !(config1 & 0x1b) &&
+ convrate <= 0x0a)
+ name = "nct72";
+ break;
case 0x57: /* ADT7461A, NCT1008 (datasheet rev. 3) */
if (man_id2 == 0x41 && chip_id2 == 0x61 &&
(address == 0x4c || address == 0x4d) && !(config1 & 0x1b) &&
convrate <= 0x0a)
name = "adt7461a";
break;
+ case 0x5a: /* NCT214 */
+ if (man_id2 == 0x41 && chip_id2 == 0x61 &&
+ common_address && !(config1 & 0x1b) && convrate <= 0x0a)
+ name = "nct214";
+ break;
case 0x62: /* ADT7481, undocumented */
if (man_id2 == 0x41 && chip_id2 == 0x81 &&
(address == 0x4b || address == 0x4c) && !(config1 & 0x10) &&
--
2.35.1
\
 
 \ /
  Last update: 2022-05-25 16:02    [W:0.412 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site