Messages in this thread | | | From | Tommaso Merciai <> | Subject | [PATCH 0/4] arm64: dts: rockchip: px30: fix ov5695 camera probe | Date | Thu, 19 May 2022 09:51:13 +0200 |
| |
Hi, This series fix camera probing issue of ov5695 camera driver for px30 evb. Improve also the ov5695.c driver using using regulator_bulk_enable/regulatore_bulk_disable function in __ov5695_power_on/__ov5695_power_off functions instead of for loop
1. use regulator_bulk_enable/regulator_bulk disable instead of for loop into ov5695 power_on/power_off 2. max drive-strength for cif_clkout_m0 3. add mux for mipi-pdn pad 4. use rk gpio naming convention for reset-gpio of ov5695
Note: - This series was tested on PX30_Mini_EVB_V11_20190507 board
Tommaso Merciai (4): media: i2c: ov5695: use regulator_bulk_enable/regulator_bulk disable instead of for loop arm64: dts: rockchip: px30: max drive-strength for cif_clkout_m0 arm64: dts: rockchip: px30: add mux for mipi-pdn pad arm64: dts: rockchip: px30: use rk gpio naming convention into reset-gpios
arch/arm64/boot/dts/rockchip/px30-evb.dts | 17 +++++++++++++-- drivers/media/i2c/ov5695.c | 25 +++++++---------------- 2 files changed, 22 insertions(+), 20 deletions(-)
-- 2.25.1
| |