lkml.org 
[lkml]   [2022]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v1 0/6] Support for RTL930x/RTL931x GPIOs
Date
This patch series adds support for the GPIO controllers as found on the
RTL930x and RTL931x SoC families of MIPS CPUs, used in managed NBase-T
ethernet switches.

The RTL931x's GPIO controller behaves the same as the one in the older
RTL838x and RTL839x series. This controller is trivially supported.

The RTL930x's controller has a reversed port order, and supports CPU
affinity settings for individual GPIO line IRQs, thus requiring two
additional changes to implement these features.

Sander Vanheule (6):
dt-bindings: gpio: realtek-otto: Add rtl9300 compatible
gpio: realtek-otto: Support reversed port layouts
gpio: realtek-otto: Support per-cpu interrupts
gpio: realtek-otto: Add RTL930x support
dt-bindings: gpio: realtek-otto: Add rtl9310 compatible
gpio: realtek-otto: Add RTL931x support

.../bindings/gpio/realtek,otto-gpio.yaml | 34 ++++-
drivers/gpio/gpio-realtek-otto.c | 137 +++++++++++++++++-
2 files changed, 164 insertions(+), 7 deletions(-)

--
2.35.1

\
 
 \ /
  Last update: 2022-04-09 22:06    [W:0.164 / U:0.852 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site