lkml.org 
[lkml]   [2022]   [Apr]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[V3 0/3] arch: arm64: dts: qcom: Configure cts sleep pinctrl to bias-bus-hold
Date
WLAN rail was leaking power during RBSC/sleep even after turning BT off.
Change sleep pinctrl configuration to handle same.

---
v3: apply same change to active state and other sc7280*.dts* as well
v2: used bias-bus-hold as per review comments
v1: intial patch used bias-disable for sleep pinctrl in sc7280-idp only
---

Vijaya Krishna Nivarthi (3):
arch: arm64: dts: qcom: Configure cts sleep pinctrl to bias-bus-hold
arch: arm64: dts: qcom: Configure cts sleep pinctrl to bias-bus-hold
arch: arm64: dts: qcom: Configure cts sleep pinctrl to bias-bus-hold

arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts | 12 ++++++------
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 12 ++++++------
arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 13 ++++++++-----
3 files changed, 20 insertions(+), 17 deletions(-)

--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by the Linux Foundation.

\
 
 \ /
  Last update: 2022-04-06 12:57    [W:0.936 / U:0.928 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site