lkml.org 
[lkml]   [2022]   [Apr]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/6] power: supply: introduce the Qualcomm smb2
Date
Add a driver for the Qualcomm PMI8998/SDM660 Switch-Mode Battery Charger
"2". This replaces the previous SMBB hardware found in older PMICs.

This driver provides basic support for initialising the hardware,
configuring the USB input current limit and reporting information about
the state of the charger. Features like type-c dual role support and OTG
switching will be added in future patches.

This patch series depends on my previous series adding support for
the Round Robin ADC which is used for reading the USB voltage and
current, it can be found here:
https://lore.kernel.org/linux-arm-msm/20220323162820.110806-1-caleb@connolly.tech/

---
Caleb Connolly (6):
power: supply: add Qualcomm SMB2 driver
arm64: dts: qcom: pmi8998: add smb2 node
arm64: dts: sdm845-oneplus: enable smb2
arm64: dts: qcom: sdm845-db845c: enable smb2
arm64: dts: qcom: sdm845-xiaomi-beryllium enable smb2
dt-bindings: power: supply: qcom,smb2: add bindings for smb2 driver

.../bindings/power/supply/qcom,smb2.yaml | 68 ++
arch/arm64/boot/dts/qcom/pmi8998.dtsi | 15 +
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 18 +
.../boot/dts/qcom/sdm845-oneplus-common.dtsi | 4 +
.../dts/qcom/sdm845-oneplus-enchilada.dts | 4 +
.../boot/dts/qcom/sdm845-oneplus-fajita.dts | 4 +
.../boot/dts/qcom/sdm845-xiaomi-beryllium.dts | 14 +
drivers/power/supply/Kconfig | 9 +
drivers/power/supply/Makefile | 1 +
drivers/power/supply/qcom_smb2.c | 930 ++++++++++++++++++
10 files changed, 1067 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/supply/qcom,smb2.yaml
create mode 100644 drivers/power/supply/qcom_smb2.c

--
2.35.1

\
 
 \ /
  Last update: 2022-04-01 22:28    [W:0.132 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site